NVIDIA Tegra Note 7 LTE Tablet Firmware OTA0 Download

Posted at November 21, 2024 by PCI-DB Team

NVIDIA Tegra Note 7 LTE Tablet Firmware OTA0 Description

TEGRA NOTE 7 LTE [P1988W] RECOVERY IMAGE FLASHING INSTRUCTIONS

To follow the instructions in this guide, you will need adb and fastboot, which are provided as part of the Android SDK.

Before flashing this recovery image to your TEGRA NOTE 7, connect your TEGRA NOTE 7 via USB to the PC where you downloaded this recovery image.

Put your TEGRA NOTE 7 into fastboot mode using one of the following methods:

SW method:
- Boot to android home screen
- Connect the device to linux/windows system
- Open terminal (on linux); command prompt (on windows).
- Type "adb reboot bootloader" in terminal/command prompt

HW method:
- Turn off the device
- Press and hold "Volume Up"+"Power" buttons till device boots

To flash this recovery image to your TEGRA NOTE 7:

Run the following commands from the directory where you extracted the recovery image package. If this is the first time you have done this procedure, you must unlock the bootloader (see below):
- fastboot flash recovery recovery.img
- fastboot flash boot boot.img
- fastboot flash system system.img
- fastboot flash userdata userdata.img
- fastboot flash staging blob
- fastboot flash dtb tegra114-tegranote7c.dtb

Unlocking the Bootloader:

Your TEGRA NOTE 7 may have shipped with a locked bootloader. To update the device,you must unlock the bootloader using the following:
- fastboot oem unlock
- Select "Unlock bootloader" option on device
- Press the "Power" button to confirm the unlock. Your device's bootloader is now unlocked.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NVIDIA Drivers