Intel Optane Memory UI/Driver 16.0.2.1086 for Windows 10 64-bit Download

Posted at December 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Intel Optane Memory UI/Driver 16.0.2.1086 for Windows 10 64-bit
Category	Motherboard
Manufacturer	Intel
File Size	66 MB
Supported OS	Windows 10 64 bit

Intel Optane Memory UI/Driver 16.0.2.1086 for Windows 10 64-bit Description

Resolved Issues In 16.0.2.1086 PV Release:
- OptaneVolume is disabled when downgrading from 16.0.1 to 15.9 driver
- [CLI] Incorrect volume information is seen when Optane Data Drive is enabled
- Waking up from S3/S4/S5 is resulting in Bug Check 1A with 2x NVMe SSD's(2TB) as DATA drives (RST Controlled)
- BSOD SYSTEM_THREAD_EXCEPTION_NOT_HAN DLED (7E) occurred after Optane separation
- "Logs are here" characters are not translated to non-English language in IRST Installation UI.
- RAID 0 performance does not meet expectation with 3 760p drives.

Resolved Issues In 16.0.2.1078 Release:

- Enable Optane in OS, system BSOD occurs after first reboot. (0x7B)
- HDD Abnormal Power off with Optane when entering DS3/S3
- BSOD 0x154 occurred when performing s4 stress with some HDD's.
- Partition created on slow drive in WinPE is not available in OS
- After making all disks spare except Optane volume, system cannot boot again (BSOD: SYSTEM_THREAD_EXCEPTION_NOT_HAN DLED (7e))
- CRITICAL_PROCESS_DIED after Optane separation and creation with different drive
- BSOD “Process1 initialization failed” occurred during S4 testing
- BSOD on NVMe drives during Sx cycling
- D1 Bug check in hiber_iastora during S4 cycling
- UNEXPECTED_STORE_EXCEPTION (154) - OS disk disappeared during S4 flow
- IRST UI show Unknown Controller in Hardware info of help page- > System Report in AHCI mode.
- BSOD 0xA0 (HIBERSTACK_INIT_FAILED) occurs when driver is upgraded without reboot and enter S4
- XML validation error on 16.0.0.1048 RST installer mup.xml
- Some words in Intel Rapid Storage Technology UI "Help" page are not localized in Chinese language
- NvmePassthrough VendorSpecific commands are blocked by driver
- Error message show up with error code "0xA008001F" when launch OptaneMemory UI
- Error "An unknown error occurred while running this application..." appears when IRST is launched from the control panel.
- Optane PCMARK HDD score is around 50K on CFL system
- Modern standby test causes PDC_WATCHDOG_TIMEOUT (14f)
- BSOD during migration after enabling Optane
- BSOD during Optane separation
- "Intel Optane Memory" tab is seen in IRST UI even when Optane device is not connected to the system
- Optane PCMV HDD cycles test score is low (around 50K) in cache full (~100%) condition
- Unexpected reboot during S3 test
- RAID0 volume state is "normal" when one of drives is disconnected. preOS
- Intel 600P SSD has slow performance on Coffee Lake platform after storage stress test
- Bugcheck 0xA0 [HIBERSTACK_INIT_FAILED] when driver is upgraded without reboot and entered S4
- ATTO Disk Benchmark freezes on 3xHDD RAID5 with Write back cache on.
- System hung up at desktop when run S4 stress test using pwrtest.exe
- IRQL_Not_Less_Or_Equal - Bugcheck D1 observed during S3 cycling.
- System encounter "C1" BSOD when run Velocity Test Suite for the second time. (FR: 100%)
- Unable to enable Optane when 2 or more RAID data volumes exist on the system
- [AHCI mode] Bugcheck PAGE_FAULT_IN_NONPAGED_AREA (50) occurs when SATA AHCI Controller is disabled
- Incorrect Optane Volume name for HDD 2TB, SB 32GB on CFL-S
- Wrong HMB memory size returned in CLI
- Different Optane Name in UI and in disk manager.
- [RcfgSata] Could not create Intel Optane memory volume on existing OS
- Serial number of the RAID member reported by RCfgSata.efi when drive is connected and when it is removed is different.
- CPU Attached Storage responsiveness (Hibernate S4 BIOS Initialization Duration) does not meet target
- Error in Rcmpsata.efi log file
- No "Optane" bit in RCmpSata BCFS output.
- Legacy RST OROM does not load on CFL platform, when enabling CSM and "Use legacy OROM" option in SATA configuration
- Trying to create a RAID volume out of two NVMe drives results in unexpected behavior
- [PreOS][CFL-S] Drives not visible under TPV RST menu after setting RAID Device ID to "Alternate"
- CPU Attached Storage HDD Password not work
- [CNL-U] Intel RST reports abnormal status after Intel Optane memory enable
- Raid volume listed as "locked" - although it is UNlocked
- Intel RST driver does not update the entire content of NVM_EXPRESS_COMPLETION structure after sending a command to the NVMe device.
- System crashes and goes to recovery after deconcatenating Intel Optane memory using RcfgSata
- Intel RAID driver will build an unknown device
- "Migration type" in BIOS show "unknown" after creating Intel Optane memory using RCfgsata.efi
- RAID0 is lost after un-plugging and replugging PCH-NVMe RAID0 volume.
- S3/S4 tests with remapped PCIe when MSI-X MessageNumberLimit is set to 1
- [Cpu Attached] Intel NVMe connected to CPU are not visible in PreOS
- CPU Attached Storage causing CAT_ERR on CFL platforms
- 0xD1 BSOD (DRIVER IRQL NOT LESS OR EQUAL) during S4 stress test
- Stress S4 causes BSOD 0x154 (UNEXPECTED STORE EXCEPTION).
- Intel RRT volume is displayed as “Intel RAID1 volume” in device manager.
- Unable to unpin moved application
- Intel Optane memory application ran into a problem after closing tray icon notification
- Cannot boot to OS when Hyper threading = Disable and Multi-processor = Disable.
- System will BSOD after Win10 RS3 OS installation on NVMe drive.
- Shrinking OEM partition does not work when some gpt attributes are set.
- BSOD "0xD1" occurred when system resumes from S3
- Inaccessible boot device BSOD after creating Raid5 volume and going through Safe Mode
- Change default APST ITPT value for nonoperational power states to 3s
- [RAID0 NVMe] Low scores when run PCMark Vantage
- SB FW version mismatch detected when Intel Optane memory is being enabled

Known Issues In 16.0.2.1086 PV Release:

- Intel Rapid Storage Technology content will be cut off on Brazil & Spanish OS
- Optane volume - System will show black screen without Back Light (BSOD 0x9F) when run S4 stress.
- Optane Memory enable item is greyed out and cannot launch after resume from S3
- SYSTEM hang (BSOD with bugcheck code: 0x1000007E)
- RAID 10 volume cannot be created using SATA ports 6, 7 and two other ports between 0 - 5.
- Intel RST - Spend too much time when run the ADK Standby performance test.
- BIOS couldn't see the following SMM SSCP installed by Intel RST 16.0.0.3318 RAID driver.
- Report error for "unsupported chipset" when optane RST driver is installed.
- Intel RST - In RAID 5 mode, HDD utilization is always high.
- PreOS does not list disks in Boot Manager preOS
- The "Auto-rebuild on hot plug" option in Preferences page cannot be enabled.
- Plugged in TBT device (connected DP) will hang or causes BSOD (km:0xfc_iastorac!nvmrequest::complete)
- System can't do BIOS recovery with RstPeim driver installed in RAID mode.
- System show BSOD - 0x133 DPC_WATCHDOG_VIOLATION when run stress S4 test.
- Optane Volume gets disabled if we use rstcli to clear cache.
- Updating storage driver intermittently causes drive letter swaps
- Sporadically restart option does not show up after enabling/disabling Optane
- [CATERR][CPUattached] Issue observed after restart from OS
- [0x9F_3_disk_IMAGE_iaStorA.sys] Data drive visible and there is 1 request (bypass queued) in Storport for this drive.
- Certain SATA SSD's cannot boot to OS after installing iRST driver.
- RST CLI tool hang
- Intel RST - The result of ATTO Disk Benchmark with RAID0/RAID1 and enable/disable writeback cache is lower than the Non-RAID JBOD value at 64KB size.
- RST UI crashes after system wakes up from Hyrbid S3 or Deep S4 or Hibernate, only if RST UI application was open earlier.
- [Optane] Windows is not detecting Optane drive after disruptive power off during disabling process
- Windows is not detecting Optane drive after disruptive power off during disabling process
- Error event log ID7000/ID7009 (iaStorAfsService) show up after PBR reset/refresh.
- Unexpected page will show. It would not go back to previous page when press "ESC".
- Volume label of ODD drive remain unchanged after ejecting CD/DVD disc in Optane model.
- Data corruption may occur in extreme stress testing corner case scenario

This download is valid for the products listed below:

- Intel Optane Memory Series (16GB, M.2 80mm PCIe 3.0, 20nm, 3D Xpoint)
- Intel Optane Memory Series (32GB, M.2 80mm PCIe 3.0, 20nm, 3D Xpoint)

About RST (Rapid Storage Technology) Drivers:

Once Intel's Rapid Storage Technology (RST) driver is applied, desktop and notebook systems will be able to manage the available storage (one or more drives) more easily.

And that's not all you should expect: updating the RST version can also bring about improved storage performance, lower power consumption, faster boot times, quicker data reads, as well as several other changes.

As far as applying this release is concerned, simply make sure your system configuration is compatible with this package, run the available setup, and follow the on-screen instructions for a complete installation. In addition to that, don't forget to perform a reboot to make sure that all changes take effect properly.

Even though other operating systems might be compatible as well, we do not recommend installing this package on platforms other than the specified ones.

With this in mind, click the download button, and get and apply the present version. Also, check with our website as often as possible in order to stay up to date with latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers