Hikvision DS-2CD4XX2 Network Camera Firmware 5.3.5 Download

Posted at November 5, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Hikvision DS-2CD4XX2 Network Camera Firmware 5.3.5
Category	Network Ip Surveillance Baby Camera
Manufacturer	Hikvision
File Size	13.6 MB
Supported OS	OS Independent

Hikvision DS-2CD4XX2 Network Camera Firmware 5.3.5 Description

This package provides the necessary installation files of Hikvision DS-2CD4XX2 Network Camera Firmware version 5.3.5.

New features:

- Warning message is shown when H.264+ is enabled to inform the unavailable functions with H.264+.
- H.264+ algorithm is not supported simultaneously with third stream, 1920x1080p, 50/60fps high frame rate, ROI, target cropping, smoothing, profile, SVC and I frame interval setting.
- New mechanism is applied to avoid network disconnection.

Installation steps:

1. Download the zip file . Once you have downloaded the file unzip it using your preferred unzipping tool and save the file to a sensible place.
2. Log into your camera.
3. Go to Configuration>System>Maintenance.
4. At the bottom of the Maintenanace page, under the ‘Remote Upgrade’ make sure that ‘firmware’ is selected from the drop down list. Now click browse and select the upgrade that you have saved. Once selected, click ‘upgrade’.
5. Once you start the upgrade you will be prompted that your device will reboot; click [OK]. The camera will now begin upgrading.
6. Once the camera has updated go to System>Device information and make sure the latest firmware has been installed.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Hikvision Drivers