Panasonic AJ-PX380G Camera Firmware 39.78-00-0.00 Download

Posted at December 22, 2024 by PCI-DB Team

Panasonic AJ-PX380G Camera Firmware 39.78-00-0.00 Description

New Features

- Main-line recording onto an SDXC/SDHC memory card available on the market, which is supposed to be for use in an urgent situation, has so far been restricted to the codecs at 50Mbps or less. But, to meet the users’ demand, this restriction is removed.
- However, that is not to guarantee the recording and playback operations with SDXC/SDHC memory cards.
- Tally control from external devices (e.g. AK-HRP200 ROP) is supported.
- No menus are newly added. This feature works according to the current Tally menu.
- REC_TALLY (Serial communication & IP communication supported)
- The following dongle are supported.
- WLAN :D-Link DWA-171(Australia) , LTE :Verizon USB730L (US)

Improvements

- The related menus are not displayed so that microP2 B cards are not CPS-formatted by mistake.
- The cameras are designed to start installing the firmware update immediately after it is downloaded via P2 Cast, and an improvement is made to this current design. Menu item “Download Only” is added. This menu item can temporarily end the update process once the download is complete when the update command is received from P2 Cast.
- In UDP transmission, the communication process of streaming format is improved.
- P2 SS becomes unable to be connected, and this problem is fixed..
- Improvement in stability at boot-up
- System error may occur on rare occasions under the specific conditions, and this problem is fixed.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers