Panasonic AJ-PG50 Memory Card Recorder Firmware 33.69-00-0.00 Download

Posted at December 22, 2024 by PCI-DB Team

Panasonic AJ-PG50 Memory Card Recorder Firmware 33.69-00-0.00 Description

New Features

- Main-line recording onto an SDXC/SDHC memory card available on the market, which is supposed to be for use in an urgent situation, has so far been restricted to the codecs at 50Mbps or less. But, to meet the users’ demand, this restriction is removed.
- However, that is not to guarantee the recording and playback operations with SDXC/SDHC memory cards.
- The following dongle are supported.
- WLAN :D-Link DWA-171(Australia) , LTE :Verizon USB730L (US)

Improvement

- The related menus are not displayed so that microP2 B cards are not CPS-formatted by mistake.
- The cameras are designed to start installing the firmware update immediately after it is downloaded via P2 Cast, and an improvement is made to this current design. Menu item “Download Only” is added. This menu item can temporarily end the update process once the download is complete when the update command is received from P2 Cast.
- In UDP transmission, the communication process of streaming format is improved.
- P2 SS becomes unable to be connected, and this problem is fixed..
- Improvement in stability at boot-up
- System error may occur on rare occasions under the specific conditions, and this problem is fixed.

Preparation for Upgrade

- Copy the update file of the Software (Firmware) to an SD memory card.
- Software can be updated using this SD memory card.
- Please refer to the procedure in the site.(Printing out of the procedure is recommended.) 

About Video Recorder Adapter Updates:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter's software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn't pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit's setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don't forget to regularly check with our website so that you don't miss any updates.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers