Panasonic AG-UX180MC Cinema Camera Firmware 1.11-00-0.00 Download

Posted at December 31, 2024 by PCI-DB Team

Panasonic AG-UX180MC Cinema Camera Firmware 1.11-00-0.00 Description

Changes:

- On rare occasions, the operation of REC button on the unit or a wired remote control may no longer have any effect. This problem is fixed.
- If the card is ejected from the main slot during the simultaneous recording, the recording in the sub-slot stops 10 hours after the start of recording. The indication shows the same as during recording, and the operations of REC button are refused. This problem is fixed.
- LCD may not show anything when the camera is booted up. This problem is fixed.
- A very few SD cards may have a write error. This problem is fixed.
- If the network address is changed when WIRELESS SETUP is set to [DIRECT] and DHCP is set to [SERVER], it sometimes made the camera impossible to connect to the iPad. This problem is fixed.

Version display method:

- Turn the power on.
- Press MENU button to display the setting menu.
- Select the “SYSTEM SETTINGS” menu and touch “INFORMATION” to open the menu.
- Select (touch) the item “VERSION” to display the version of system in this camera recorder.

Update procedure

- Turn the power on and set to RECORDING mode.
- Insert the SD memory card into the SD memory card slot 1. (If the card is inserted into slot 2, the update file will not be recognized.)
- Press the MENU button to display the “SYSTEM SETTINGS” “INFORMATION” menu.
- Select (touch) the item “UPDATE” and “YES” on the INFORMATION menu.
- If the update can be executed, the versions of the camera recorder and the update file on the SD card are displayed.
- Select (touch) the “SET” button, the update processing will start. (IF “Return mark” is selected, the screen will return to the INFORMATIN menu and the update processing will not start.)
- The progress bar appears in LCD screen when shifting to the update processing. Software update takes approx. 2 to 3min. Do not power down while updating.
- When the update is completed, the power automatically turns OFF/ON and the message “Update is completed.” is displayed.
- Select (touch) the “OK” button. The normal “Recording” mode screen is displayed.

About Integrated Web Camera Updates:

Enabling your embedded web camera by installing appropriate software will allow your system to capture and send images through a computer network, and include support for various features that the webcam benefits from.

In addition to that, updating the software on your device can fix various problems that might be encountered during the product's lifetime, and improve existing features like image quality, or add support for new ones.

When it comes to the installation process, the steps are very simple, as each manufacturer tries to make them as easy as possible, so that every user can perform the update on their own – simply run the package and follow the on-screen instructions for a complete installation.

Therefore, if you consider applying this package, hit the download button, and install it on your computer. Moreover, constantly check with our website in order to make sure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers