Posted at December 25, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Panasonic AU-EVA1P Cinema Camera Firmware 2.02-00-0.00 |
---|---|
Category | Scanner Digital Camera Webcam |
Manufacturer | Panasonic |
File Size | 29.8 MB |
Supported OS | OS Independent |
- 4096x2160(4K): 422Intra 400M 29.97p,24p,25p,23.98p
- 3840x2160(UHD): 422Intra 400M 29.97p,25p,23.98p
- 2048x1080(2K): 422Intra 200M 59.94p,50p / 422Intra 100M 29.97p,24p,25p,23.98p
- 1920x1080(FHD): 422Intra 200M 59.94p,50p / 422Intra 100M 29.97p,25p,23.98p,59.94i,50i / 422LongGOP 50M 59.94i,50i
- 4K / UHD: 422Intra 400M Max 30fps
- 2K / FHD: 422Intra 200M/100M Max 120fps (equivalent to 400M)
- Support for Interval REC
- Support for RAW Output: 5.7K/30p, Crop 4K/60p, Crop 2K/240p
- Output of CAMERA metadata (info about sensor, lens, etc.) superimposed on SDI
- Output of information displayed on LCD so as to be able to use HDMI output for VF purpose(Focus Assist and HOME Screen)
- Improvement in HOME Screen operability: Switching of VFR ON/OFF, SHUTTER ON/OFF and ISO/GAIN
- Improvement of WFM: Transmittance of WFM display is lowered for improvement in readability. WFM can be switched directly from Focus Square.
- Compatibility with 3rd-party wired remote controls
- When SDI OUT menu is at OFF, mounting/dismounting of LCD causes REC S/S button on the Grip to no longer work. This problem is fixed.
- Turn the power on.
- Press MENU button to display the setting menu.
- Select the “SYSTEM SETTINGS” menu and touch “INFORMATION” to open the menu.
- Select (touch) the item “VERSION” to display the version of system in this camera recorder.
- Turn the power on and set to RECORDING mode.
- Insert the SD memory card into the SD memory card slot 1. (If the card is inserted into slot 2, the update file will not be recognized.)
- Press the MENU button to display the “SYSTEM SETTINGS” “INFORMATION” menu.
- Select (touch) the item “UPDATE” and “YES” on the INFORMATION menu.
- If the update can be executed, the versions of the camera recorder and the update file on the SD card are displayed.
- Select (touch) the “SET” button, the update processing will start. (IF “Return mark” is selected, the screen will return to the INFORMATIN menu and the update processing will not start.)
- The progress bar appears in LCD screen when shifting to the update processing. Software update takes approx. 2 to 3min. Do not power down while updating.
- When the update is completed, the power automatically turns OFF/ON and the message “Update is completed.” is displayed.
- Select (touch) the “OK” button. The normal “Recording” mode screen is displayed.
Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Dvd Bluray Media Players File Size: 92.5 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 69.6 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 106.6 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 106.6 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 106.6 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 69.6 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 92.5 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 92.5 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 69.6 MB OS Independent
Install DriverDevice Type: Dvd Bluray Media Players File Size: 92.5 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.