HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.03 64-bit Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.03 64-bit
Category	Firmware
Manufacturer	HP
File Size	12.1 MB
Supported OS	Windows 2008 ,Windows Server 2012

HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.03 64-bit Description

This component provides and installs an updated version of firmware for the iLO 4 Management Processor allowing for continued management support of your Server.

Enhancements:

- Added support for TLS v1.1 and TLS v1.2 when using HTTPS URLs with iLO scripted virtual media, firmware update, certificate import, SSH key import, and for HP remote support registration and data collection.

Fixes:

- Improved the reliability of DIMM SPD read/write operations.
- A timing issue could cause intermittent Windows Hardware Error Architecture (WHEA) test failures.
- Booting from an SD card with ESXi could fail.
- AMD-based HP ProLiant Gen 8 servers with iLO 4 2.00 or 2.02 might report incorrect processor temperatures.
- HP ProLiant Gen 8 servers with iLO 4 2.00 or 2.02 might report an incorrect value for the temp1 sensor.
- HP ProLiant Gen8 servers with iLO 4 2.00 or 2.02 might display an incorrectly lit FAN1 Systems Insight Display (SID) LED when no FAN1 is installed.
- Partitions on the NAND device might fail to mount. In some cases, this could result in Active Health System download failures or the Embedded User Partition might not be available.
- Addressed SSRT101745
- Addressed SSRT101790

Note: To address the “POODLE” security vulnerability, the iLO security policy has changed and SSLv3 is now disabled. You may need to enable TLS (Transport Layer Security) in your browser in order to access the iLO web interface. TLS is the successor to SSL (Secure Sockets Layer).

For best performance and IPv6 support, HP recommends upgrading to the latest versions of the iLO utilities:

- HPQLOCFG 1.20 (replaced CPQLOCFG)
- HP Lights-Out XML Scripting Sample 4.40 bundle
- HPONCFG 4.4.0.0
- LOCFG.PL 4.40 (included in the HP Lights-Out XML Scripting Sample bundle)
- HPLOMIG 4.40 (upgrade HPLOMIG before installing this version of iLO 4)

Upgrade Requirement:

- Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related HP Drivers