Intel Rapid Storage Technology Driver 12.0.0.1083 for Windows 7/Windows 8 Download

Posted at November 19, 2024 by PCI-DB Team

Intel Rapid Storage Technology Driver 12.0.0.1083 for Windows 7/Windows 8 Description

Fixes:

- HW information show "unknown controller" on RST System report in AHCI mode
- WHQL: 0xD1 BSOD during Disk Stress / Disk Verification (BLOCKING)
- WHQL: Optical Media Burning test failure during write scenario (BLOCKING)
- Cannot erase optical media using Windows or Roxio 2012
- RSTCLI allows an SSD to accelerate the cache volume; neither it nor the OROM will be able to clear out the resultant config
- UI option for setting 2nd array volume to WBC is disabled when it should be enabled
- Manage page does not dynamically update the completion status of a cache mode-change
- ODD is enumerated in SSD+ODD configuration with Fast-Boot Enabled
- RCfgSata unable to determine default RAID level if no RAID level param provided
- SCT HII Test error
- Degrading R5 system volume after dirty shutdown causes volume to become irrecoverably failed after system comes up
- HyperX Kingston SSD's are disappearing or not being properly enumerated in the OROM.
- UI: Typo under Link Power Management ("affect" instead of "effect")
- ZPODD IOCTL returns incorrect status when ZPODD is connected to a non-ACPI capable port
- Error Recovery Policy Causing Black Screen While Booting From S4 Mode
- CLI shows cache policy as unknown if a RAID volume's policy is set to Write through or to Read Only
- Asynchronous Notification(AN) not ENABLED by default in 12.0 and 12.5 baselines
- If RRT OS volume is restarted while accessing files on the recovery disk, the recovery disk is not re-associated back into the RRT volume.
- BLA reporting “No disk attached” in the SATA LPM module.
- Readme.txt is needs to be updated with latest updates
- The accessible RRT recovery disk in On Request mode will become "missing" state after S4 resume
- WHQL: 0xD1 BSOD when Driver Verifier Force IRQL Checking is enabled (BLOCKING)
- PLDS BT20F: tray does not eject after resuming from S4
- RST 12.0 INF- Update with Lynx Point-H chipset official name
- Slot load ZPODD does not power down after first power cycle
- Pioneer BDC-TD04: After resuming from S3, ZPODD disappears from Device Manager or Disk Manager
- System fails to burn medias with Roxio Creator repeatedly with ZPODD devices
- TEAC DVD-ROM: BSoD 0xD1 when accessing drive under Zero Power state
- Double-clicking ODD in Explorer before media is detected will cause ZPODD tray to open.
- Roxio ejects ODD automatically before media is detected
- Power Increase observed as soon as ZPODD is asleep (power is cut off from the ZPODD)
- Driver: Legacy ODD on port 2 with mechanical presence switch will show 0 GB SATA drive in UI
- DVD Region tab does not display in ODD properties - BT20N ZPODD device
- Slot load ZPODD does not power down after first power cycle
- UI offers additional disks through volume "add disk" option when it would exceed the 2TB limit on MBR
- CLI does not wait for trans to enhance to finish before executing trans to off; volume fails on re-acceleration.
- Tray Icon notifications on reboot include "enterprise" in title
- WHQL: Optical Media Burning test failure during media erase (BLOCKING)
- The SATA transfer rate info is incorrectly displayed in the UI
- RSTCLI64 construes RAID level 6 as legitimate. It will crash if we attempt to create a volume of that type.
- Win8 SRT Accelerated Disk in MAX mode loses Acceleration on restart when Fast Boot is Enabled
- Unable to accelerate drive that is not initialized in disk manager due to lack of space for metadata
- A1h command (IDENTIFY PACKET DEVICE) failure on ODD with Win8 RST driver
- System unexpectedly reboot during S4 stress test
- WHQL: Failure to write Crashdump/Hiberfile on Win8 RAID (BLOCKING)
- RSTCLI will be unable to remove metadata from cache SSD if -M -Z cmd is preceded by mode-change
- WBC buffer flushing enable/disable setting is incorrect
- GPT only- Unexpected 2GB data volume created with <64GB SSDs and Full SSD space selected for cache
- Volume write-cache available on RRT Configure Volume page with Windows WC buffer flushing on
- UI will display an incorrect value for the max cache size when SSD partition is < 2GB
- BSOD ''DRIVER_IRQL_NOT_LESS_OR_EQUAL(iaStorA.sys)'' while running extended stress tests
- UI allows cache mode-change hyperlinks to be clickable BEFORE acceleration operation completes
- Rapidly enabling/disabling Lake Tiny causes Driver verifier and page_fault BSODs in Win8
- UI allows second matrix R1 volume to be changed into RRT volume but induces unknown error after attempt
- RSTCLI returns success code when an acceleration operation in fact fails to occur
- eSATA port/drive can be "marked as spare."
- 2 x 2TB raid1 - UI shows option to "change type" and window pops up when click "OK" button on "change volume type" page
- Unknown Error when enabling acceleration in Win 7 / Win 8 on specific SSDs
- The write caching of SSD will auto check after resume from S3/S4/CB
- 11.7 bug - SRT causing extra cache misses on partial writes - extra spin-ups in AOAC
- 12.0 UI sporadically crashes during volume deletion and SRT Reset operations
- RSTCLI64 will crash when we enter a volume name equivalent to 16 characters
- Cache mode will NOT be retained if we disable write-caching via device manager and then change mode to max
- Unknown error occurs while creating Recovery volume
- RSTCLI will crash and mark disks as unknown when we attempt to create a volume without the -n param
- Dynamic Storage Accelerator manual mode gear shouldn't follow OS power plan
- GPT only- Error Message occurred while migration RAID0 from a single disk to 3 more disks
- Toggling the Acceleration mode of a volume will alter the volume's member disks' cache state
- Message "Disc erase unsuccessfully" pops up while "quick erase" CD-RW disc contents via s/w app.
- EFI and OROM UI: kB/KB inconsistency
- UI unknown error after accelerating OS drive, rebooting, and disabling acceleration
- UI will allow acceleration with partitioned SSD even when doing so would violate the RAID volume limit
- RSTCLI allows user to accelerate SSDs
- RSTCLI marks prospective member disks as unknown when we attempt an erroneous Create Volume From Disk migration
- RSTCLI will induce system crash AFTER failing to create a volume using the system disk
- Driver is not enabling DIPM if CAP.SALP is 0, but CAP.SALP only pertains to HIPM.
- Windows 2008-64
- IAStoraIcon.exe error pos up and stress tool stops testing during Winpvt- Video Stress + AC/DC Cycling test.
- UI crashes if a Win 8 "Storage Spaces" volume is present
- Dynamic Storage Accelerator is not enabled in RAID mode
- UI RRT - WBC Help Bubble Not Offered
- The write caching of SSD will auto check after resume from S3/S4/CB
- Activate LED action link on the UI manage disk page is always available regardless user disable/enable the option in BIOS (both RAID and AHCI mode)
- 11.6 driver .inf needs FeatureScore to ensure the driver outweighs the 11.2 driver in Windows installation
- Used cache-size bar does not update anymore in the 12.0 UI

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers