Intel S2600GL Server Board IDA/OFU Firmware 2.06.0002 Download

Posted at November 5, 2024 by PCI-DB Team

Intel S2600GL Server Board IDA/OFU Firmware 2.06.0002 Description

Versions:

- BIOS: 02.06.0002
- ME: 02.01.07.328
- BMC: 01.25.9398
- FRUSDR: 1.13

Changes in BIOS 02.06.0002:

NOTICE: As security requirement, R02.06.0002 revision doesn't support capsule downgrade in normal mode. In order to downgrade from this BIOS version, you must use the recovery jumper method.
- Fixed: The EFI script “Variable_reclaim.nsh” cannot complete successful and the BIOS Error Manager screen will show "A0A8" memory update failure error.
- Fixed: POST screen and BIOS setup screen will shows different BIOS version under recovery mode.
- Fixed: Removable RAID Controller .
- Fixed: Change Boot Order with SYSCFG in S2600CO2
- Fixed: "Melock" fix.
- Fixed: (X) BIOS 2.04 help screen text typos.
- Fixed: Romley Security issue.
- Fixed: The link speed of RS3WC080 storage card only report to Gen2 on BIOS R02.04.0002 with SNB CPU.
- Fixed: UEFI Optimized Boot acknowledges F2 Setup to start, but boots Windows instead.

Changes in ME 2.01.07.328:

- Fixed: Platform is not able to power on properly after being shut down by NM Policy
- Fixed: Global platform power consumption reported by NM Statistics in S5 is incorrect
- Fixed: OOB (out-of-band) stress test by issuing the wrong username may cause connection to be unavailable
- Fixed: Shutdown action can be interrupted by cold reset when volatile NM policy is in use

Changes in BMC 01.25.9398:

- BMC change to ensure the system remains off after an overcurrent event until the system has been AC power cycled
-EPSD100027525: "Voltage /BB +5.0V STBY (#0xD3) Lower Non-critical - going low. Trigger Threshold = 0xD4. Deasserted Event." should not log after host restart.
- EPSD100028577: Can't set the 15th user account and password by manual under WebUI
- EPSD100248339: Unable to change CR rank order of PS2 to primary. Setting rank order of PS2 to secondary and PS1 as primary works.
- Add a new support for only TLS1.2 protocol(both for stunnel and openssl).
- Disable stunnel for ihc
- The www section location is changed from 00c00000 to 00c20000.
- Update openssl to 1.0.2d.

This download is valid for the products listed below:

- Intel Server Board S2600GZ
- Intel Server System R2208GZ4GC
- Intel Server System R2308GZ4GCSAS
- Intel Server System R2312GZ4GCSAS
- Intel Server System R2208GZ4IS
- Intel Server System R2308GZ4GCIOC
- Intel Server System R2312GZ4GC4
- Intel Server System R2208GZ4GS9
- Intel Server System R2308GZ4GC
- Intel Server System R2208GL4GS
- Intel Server System R2224GL4GS
- Intel Server System R2208GZ4GCSAS
- Intel Server System R1208GZ4GC
- Intel Server System R1304GL4DS
- Intel Server System R1208GL4DS
- Intel Server System R1304GZ4GC10G
- Intel Server System R1208GZ4GCSAS
- Intel Server System R1208GZ4GC10G
- Intel Server System R2216GZ4GC
- Intel Server System R2312GZ4GC
- Intel Server System R2216GL4GS
- Intel Server System R2308GL4GS
- Intel Server System R2312GL4GS
- Intel Server System R2216GZ4GCSAS
- Intel Server System R2216GZ4GCIOC
- Intel Server System R1304GL4DS9
- Intel Server System R1208GZ4GS9
- Intel Server System R1304GZ4GS9
- Intel Server System R1208GZ4GCIOC
- Intel Server System R2308GZ4GS9
- Intel Server Board S2600GL
- Intel Server System R1304GZ4GC
- Intel Server System R2224GZ4GC
- Intel Server System R2208GZ4GC10G
- Intel Server System R2224GZ4GCSAS
- Intel Server System R2216GZ4GCLX
- Intel Server System R2224GZ4GC4
- Intel Server System R2308GL4DS9
- Intel Server System R2208GL4DS9
- Intel Server System R2312GZ4GS9

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

In order to apply this package, it would be best if you carefully read and understand the instructions provided by your computer manufacturer, and perform the update only when you have completely familiarized yourself with the steps.

In addition to that, make sure you perform a system reboot after upgrading the firmware version in order to allow all changes to take effect properly.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS.

Still, regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers