Pioneer AVH-2330NEX Receiver Firmware 8.31 Download

Posted at November 21, 2024 by PCI-DB Team

Pioneer AVH-2330NEX Receiver Firmware 8.31 Description

This firmware update contains the following improvements:

- Fixed incompatibility issues of virtual keyboard with iOS8

CAUTION

- DO NOT turn your unit off or disconnect the USB storage device while the firmware is being updated.
- You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
- DO NOT perform this firmware update if the model number of your Pioneer DVD Receiver isn’t compatible.
- Ensure that the update file is located within the root (top) folder of your USB storage device. There should be no other files within the USB storage device.
- While your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the unit’s touchscreen as this may result in severe damage to your unit.
- DO NOT remove the USB storage device during the firmware update process.
- Disconnect any external mobile devices that are currently connected to your unit

Checking the firmware version

- Start the vehicle engine.
- Press the [Home] button.
- Touch the following keys in the following order: Settings > System
- Scroll down the list and touch [System Information]
- Touch [Firmware information].
- After the “Firmware Information” screen appears, check the firmware version.
- Verify that the firmware on your unit is not already the latest.

Updating the Firmware on Your Unit

- Download and unzip the downloadable archive.
- Connect a blank (formatted) USB storage device to your computer, and then locate and copy the .AVH file onto the USB storage device.
- Start the vehicle engine.
- Connect the USB storage device to the USB input on your unit.
- Set the audio source to “OFF” on your unit.
- Press the [Home] button.
- Touch the keys below in the following order: Settings > System.
- Scroll down the list and touch [System information].
- Touch [Firmware Update].
- The “Firmware Update” screen appears.
- Touch [Continue].
- Read the “WARNING,” then touch the [Start] button to start the update process. If it shows “ERROR” on the display, try another USB device
- After starting, there will be a progress bar while updating.
- Display will show “It succeeded…” when the update is complete.
- The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen.
- The firmware update is now complete. Your Pioneer DVD Receiver is now ready for use 

About SmartWatch Firmware:

Changing the SmartWatch's firmware version can increase its overall performance and stability, enhance various applications or improve their auto-update methods, as well as bring several other changes that might be useful for your device.

So if you consider applying this release, make sure you have read and understood the installation steps, and back up all your important files from the device.

As far as the update method is concerned, usually, you must get the downloadable package (extract it if necessary), transfer it to the SmartWatch through the available USB cable or via a compatible memory card, go to the setup menu's firmware upgrade section, and initiate the process.

Therefore, if you wish to upgrade your SmartWatch's firmware to this version, hit the download button and get the desired package. Moreover, don't forget to check with our website as often as possible in order to stay up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Pioneer Drivers