ISAW A2 Ace Action Camera Firmware 1.1.2 Download

Posted at December 22, 2024 by PCI-DB Team

ISAW A2 Ace Action Camera Firmware 1.1.2 Description

Fixes:

- Support ISAW MANAGER image cropping time synchronization software.
- Enhanced image quality SUNNY SKY.
- The default value is 50% of the volume of MIC.
- Rearrange the file name.

Firmware installation steps:

1. Download the file and unzip the archive. Firmware Name: A2_112.UGF.
2. Insert a memory card in your camera and connect it via USB to your computer. Turn the camera on so it is identified as an external drive.
3. Copy the firmware file in the root of the memory card. You can also perform this operation using a memory card reader.
4. Once the firmware has been successfully copied, disconnect the USB cable or put the card back in the camera.
5. 5 seconds after turning the camera on the upgrade will start.
6. Once it’s finished the camera will turn itself off.
7. Turn it back on to start using the new firmware.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.  

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers