Nikon COOLPIX L28 Camera Firmware 1.2 Download

Posted at December 3, 2024 by PCI-DB Team

Nikon COOLPIX L28 Camera Firmware 1.2 Description

Fixes:

- Occurrence of an issue that in some rare cases prevented proper recovery of the camera, even when it was turned off and then on again, when a lens error occurred has been reduced

How to verify your camera’s current firmware version:

- Turn on the camera.
- Press the camera’s MENU button to display the menu.
- Press the multi selector to the left to highlight the menu icon, select the setup tab, and press the OK button.
- Select Firmware version in the setup menu and press the OK button.
- The camera's firmware version will be displayed.
- Turn off the camera.

Quick Install Guide:

- Power the camera from AC adapter unit or use a fully charged battery.
- Create a new folder with an appropriate name on your computer's hard drive.
- Download the firmware file.
- Run the downloaded file to create a folder called L28Update which contains the firmware folder.
- Use a card reader or similar device to copy the firmware folder to the root directory of a memory card formatted in the camera.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Select Firmware version in the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers