Peplink AP One In-Wall Access Point Firmware 3.5.3 Download

Posted at November 19, 2024 by PCI-DB Team

Peplink AP One In-Wall Access Point Firmware 3.5.3 Description

Important Notice:

- Upgrade APs to 3.5.3 Before Upgrading Balance and MAX devices to 6.2.1 or above: When running Balance and MAX Firmware 6.2.1 or above, Peplink routers will be unable to upgrade APs running 3.5.0 or below using upgrade packs. If you are using a Peplink router to manage APs running 3.5.0 or below, please upgrade APs to Firmware 3.5.3 before upgrading your Peplink router.

New Features:

Feature Description Per-Port VLAN:
- Support Per-port VLAN support added for all models except AP One 300M, AP One AC Mini, AP One Enterprise, and AP One Flex 300M.

Resolved Issues:

DNS:
- APs can now support a secondary DNS server.

InControl 2:
- When an AP obtains an IP address from a DHCP server, it does not submit a configuration backup to InControl 2.

VLAN Assignment:
- When dynamic VLAN assignment via Radius Protocol has been enabled, clients will lose their VLAN assignment and fall back to the default untagged LAN.

Captive Portal:
- Wi-Fi clients are occasionally unable to sign-in to InControl 2 managed captive portals.

PepVPN:
- If PepVPN is enabled, Wi-Fi clients will be unable to ping the AP, remote peers, or the Internet.

Report a Bug:

- To report a bug, please open a support ticket at Peplink Support Ticket.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Peplink Drivers