Intel RSTe (RAID) Driver 3.6.0.1093 Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Intel RSTe (RAID) Driver 3.6.0.1093
Category	Motherboard
Manufacturer	Intel
File Size	13.6 MB
Supported OS	Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit

Intel RSTe (RAID) Driver 3.6.0.1093 Description

Intel Rapid Storage Technology enterprise (Intel RSTe) is designed to provide functionality for the following Storage Controllers:

SCU Controllers:

- Intel C600 series chipset SAS RAID (SATA mode) Controller
- Intel C600 series chipset SAS RAID Controller

SATA RAID Controllers:

- Intel C600 series chipset SATA RAID Controller

SATA AHCI Controllers:

- Intel C600 series chipset SATA AHCI Controller

This driver supports RAID 0, 1, 5 and 10. The driver should be installed after the operating system has been installed. F6 and RAID BIOS configurations need to be performed prior to installation of this driver for proper operation.

Provides English-only files if you have an English version of the operating system.

New Features Included in this Release

- Legacy OROM Boot Behind Expander Support
RSTe SCU Legacy OROM
RSTe DOS Based RIAD Configuration Utility
RSTe GUI
- RSTe Command Line Intrace Tool Supports Clearing RAID Metadata

Fixes:

- Manufacturer and model number may not match between RSTe GUI and RSTe System Report
- Potential data loss when using Solid State Drives (SSDs) that do not support Power Safe Write Cache
- System may not restart automatically when prompted after Installation
- RAID Volume may be degraded after an S3 resume
- The number of drives shown and the number of SATA ports reported in Intel RSTe GUI may not be consistent
- RSTe EFI Tools may not function properly in a Secure Boot environment
- RSTe Driver Copyright date may not be correct
- Attempting to migrate a RAID Volume may result in a system failure with the Error Code of 0xD1
- SCU RAID Volume may fail during a system restart
- RSTe GUI may report an "Unknown error" after deleting a volume following a ROHI Rebuild
- RSTe UI Copyright date may not be correct.
- Serial Number of SATA Disk connected to the SCU Controller may be reported incorrectly

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers