EVGA Z87 Stinger BIOS 1.09 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	EVGA Z87 Stinger BIOS 1.09
Category	Bios
Manufacturer	EVGA
File Size	4.8 MB
Supported OS	OS Independent ,Windows All

EVGA Z87 Stinger BIOS 1.09 Description

Fixes:
- Adds support for G3258 CPU overclocking
- Improve mouse support
- Improve system stability

Windows Installation:

- Download the correct .zip file for your motherboard:
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.

USB Flash/DOS Drive Installation:

- Create a bootable disk.
- Extract the above .zip file to your bootable disk.
- From a DOS prompt, run update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, shut the system down completely. Then power on again, and verify that the correct version was applied by checking the version number on the lower right corner of the BIOS screen.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EVGA Drivers