EVGA Z87 Classified BIOS 1.09 Download

Posted at November 4, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	EVGA Z87 Classified BIOS 1.09
Category	Bios
Manufacturer	EVGA
File Size	4.9 MB
Supported OS	OS Independent ,Windows All

EVGA Z87 Classified BIOS 1.09 Description

Fixes:
- Adds support for G3258 CPU overclocking
- Improve mouse support
- Improve system stability

Windows Installation:

- Download the correct .zip file for your motherboard:
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.

USB Flash/DOS Drive Installation:

- Create a bootable disk.
- Extract the above .zip file to your bootable disk.
- From a DOS prompt, run update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, shut the system down completely. Then power on again, and verify that the correct version was applied by checking the version number on the lower right corner of the BIOS screen.

About BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS.

Still, regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

So, if this release includes useful changes, hit the download button, get the package, and update your BIOS version. Otherwise, check with our website as often as possible, so that you don’t miss the release that you need.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EVGA Drivers