Canon VB-M600D Network Camera Firmware 1.1.2 Download

Posted at December 22, 2024 by PCI-DB Team

Canon VB-M600D Network Camera Firmware 1.1.2 Description

Changes:

- Improves the performance of HTTP distribution for RTP streams.
- Corrects a phenomenon where, in rare cases, the FTP/HTTP upload function and E-mail notification function do not operate when the camera is started.
- Corrects a phenomenon where, in rare cases, the image becomes vertically inverted when the camera is started.

Precautions:

- After completing the firmware upgrade, use the software installer (AdminToolsCertificate.exe) included in this download to install the Admin Tools Certificate. The Admin Tools Certificate is a digital certificate needed for using Admin Viewer and Admin Tools.

Please follow the steps below to install the Admin Tools Certificate.
1) Double-click AdminToolsCertificate.exe.
2) When the [User Account Control] dialog box appears, click [Yes] or [Continue].
3) A dialog box will appear, click [OK].

- After completing the firmware upgrade, you will not be able to use the Proxy Authentication Admin Tools included on the CD-ROM.

- After completing the firmware upgrade, the camera's time settings may have changed. Reset the time on the settings page and reboot the camera.

- The functions provided by completing the upgrade are not listed in the manuals on the included CD-ROM. Download the latest version separately.

Setup:

- Download the file to any folder.
- Double-click the file to start the decompression program.
- Select any folder, and start decompression (UnZip).
- For further instructions, refer to Readme in the decompressed folder.

About Network Camera Firmware Updates:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Canon Drivers