MSI MS-98D1 Realtek HD Audio Driver 5.17 for Linux Download

Posted at November 21, 2024 by PCI-DB Team

MSI MS-98D1 Realtek HD Audio Driver 5.17 for Linux Description

Specifications:

Processor:
- CPU: Intel Atom D2550/N2800/N2600 (Dual Core) processor
- CPU Type: Onboard
- Front Side Bus: N/A
- Chipset: Intel NM10 Express
- BIOS: AMI 32Mbit SPI

System Memory:

- Technology: Single-channel DDR3 1066MHz (non-ECC) (N2600 only supports DDR3 800MHz)
- Max. Capacity: Up to 4GB (N2600 supports up to 2GB)
- Socket: 1 x 204-pin SO-DIMM

Display:

- Graphic Controller: Intel GMA3650 Graphics (N2600 only supports GMA3600)
- LVDS: 2 x LVDS (LVDS1/LVDS2)
- LVDS1: Single-channel 18/24-bit (D2550/N2800/N2600 only support 18-bit)
- LVDS2: Dual-channel 24-bit
- eDP: N/A
- VGA: N/A
- DVI: Yes (DVI-I)
- HDMI: N/A
- DisplayPort: N/A
- Display Mode: 2 independent displays supported (DVI-I + LVDS1, DVI-I + LVDS2, LVDS1 + LVDS2)

Ethernet:

- Controller: 2 x Intel I210-AT GbE LAN

Audio:

- Controller: Realtek ALC887 HD Audio Codec

Super I/O:

- Controller: Fintek F81866

H/W Monitor:

- Watchdog Timer: 255-level Watchdog Timer
- Smart Fan: Yes

TPM:

- Controller: N/A

I/O Interface:

- USB: 6 x USB 2.0 (4 x rear, 2 x internal)
- Serial: 6 x COM ports (COM1: rear; COM2~6: internal)
- COM1: RS-232/422/485, 0V/5V/12V
- COM2~6: RS-232, 0V/5V/12V
- Parallel: Yes
- PS/2: Yes
- GPIO: 8-bits (4 x GPI; 4 x GPO)

Expansion Slot:

- PCIe x 16: N/A
- PCIe x 4: N/A
- PCIe x 1: N/A
- PCI: (1 x PCI-104)
- Mni-PCI E: 2 (one with SIM holder; one with mSATA)

Storage:

- SATA: 1 x SATA 2.0
- IDE: N/A
- eSATA: N/A
- CFast: N/A
- mSATA: 1
- CompactFlash: N/A

Power Source:

- Power Adaptor: DC-in 9~36V
- Power Supply: N/A

Environment:

- Operating Temperature: 0 ~ 60°C
- Storage Temperature: -20 ~ 80°C
- Operating Humidity: 10 ~ 90%, non-condensing
- Storage Humidity: 10 ~ 90%, non-condensing

Form Factor:

- Dimensions: 165mm x 115mm (EPIC)
- Weight: 0.37 Kg

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers