Asus Rampage II Extreme Marvell Yukon Gigabit Driver 11.10.5.3 for Win7 WHQL Download

Chipset

Intel X58 /ICH10R

System Bus

Up to 6400 MT/s with QuickPath Interconnection

Memory

6 x DIMM, Max. 24 GB, DDR3 2000(O.C.)/1800(O.C.)/1600(O.C.)/1333/1066 Non-ECC,Un-buffered Memory
Triple channel memory architecture
* Supports Intel Extreme Memory Profile (XMP)
**Due to Intel spec definition, DIMMs of DDR3-1333 or above are out of spec.

Expansion Slots

3 x PCIe 2.0 x16 support at x16, x8, x8, or dual x16 speed
2 x PCIe 2.0 x1 ( the PCIEx1_1 (black) is compatible with audio slot)
1 x PCI 2.2

Multi-GPU Support

Support NVIDIA 3-Way SLI / ATI CrossFireX Technology
* We recommend that you use full tower chassis for building a 3-Way SLI system.

Storage

Intel ICH10R controller
6 xSATA 3 Gb/s ports
Intel Matrix Storage Technology Support RAID 0,1,5,10
JMicron JMB363 PATA and SATA controller
1 xUltraDMA 133/100/66/33 for up to 2 PATA devices
1 xExternal SATA 3.0 Gb/s port (SATA On-the-Go)
1 xSATA 3.0 Gb/s port
*Due to the Windows XP/ Vista limitation, the RAID array with the total capacity over 2TB cannot be set as a boot disk. A RAID array over 2TB can only be set as a data disk only.
 

LAN

Dual Gigabit LAN controllers, both featuring AI NET2 Support Teaming Technology

Audio

SupremeFX X-Fi Audio Card
- ADI AD2000B 8 -Channel High Definition Audio CODEC
- EAX Advanced HD 4.0
- X-Fi CMSS-3D
- X-Fi Crystalizer
- Creative ALchemy
- Supports 1 x S/PDIF out header
- Supports Coaxial/Optical S/PDIF out ports on rear

IEEE 1394

2 x 1394a ports (1 port at back I/O, 1 port onboard)

USB

12 USB 2.0 ports (6 ports at mid-board, 6 ports at back panel)

Overclocking Features

TweakIt
ProbeIt
Extreme Engine with ML Cap
- 16-phase CPU power
- 3-phase QPI/DRAM power
- 3-phase NB power
- 3-phase Memory power
- ML Caps on CPU, memory and NB respectively
CPU Level Up
iROG
Extreme Tweaker
BIOS Flashback
Loadline Calibration

Intelligent overclocking tools:

- AI Gear 4
- ASUS AI Booster Utility
- O.C Profile

Overclocking Protection:

- COP EX (Component Overheat Protection - EX)
- Voltiminder LED
- ASUS C.P.R.(CPU Parameter Recall)

Special Features

External LCD Poster

Onboard Switches:

Power / Reset / Clr CMOS (at rear)
EL I/O
Q-Fan Plus
ROG BIOS Wallpaper
ASUS EPU-6 Engine
ASUS Q-Connector
ASUS Fan Xpert
ASUS EZ Flash 2
ASUS CrashFree BIOS 3
ASUS MyLogo3

Back Panel I/O Ports

1 x PS/2 Keyboard port(purple)
1 x External SATA port
2 x LAN (RJ45) port
6 x USB 2.0/1.1 ports
1 x IEEE1394a port
1 x Clr CMOS switch

Internal I/O Connectors

3 x USB connectors supports additional 6 USB 2.0 ports
1 x Floppy disk drive connector
1 x IDE connector
7 x SATA connectors
1 x IEEE 1394a connector
1 x Chassis Fan connector
x 8-pin ATX 12V Power connector
24-pin ATX Power connector
1 x EL I/O Shield Connector
3 x thermal sensor connector
1 x En/Dis-able Clr CMOS connector

System Panel

8 x Fan connectors:
1 x CPU / 1 x PWR / 3 x Chassis / 3 x Optional
8 x ProbeIt connectors
1 x LCD Poster connector
1 x BIOS FlashBack boot up selection header
1 x ROG light connector

BIOS

16 Mb Flash ROM
AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.4, ACPI2.0a Multi-Language BIOS

Manageability

WOL by PME,WOR by PME,Chasis Intrusion,PXE

Accessories

ProbeIt Cable
3-Way SLI Cable
SLI Cable
ASUS Optional Fan
SupremeFX X-Fi Audio Card
External LCD Poster
3 in 1 ASUS Q-Connector Kit
UltraDMA 133/100/66 cable
SATA cables
SATA power cables
2-port USB2.0 + IEEE 1394a module
EL I/O Shield
Thermal sensor cables
Cable Ties
User's manual

Support Disc

Support DVD:
- Drivers and applications
Sound Blaster X-Fi Utility
Futuremark 3DMark Vantage Advanced Edition
Kaspersky Anti-Virus
ASUS TurboV utility
ASUS PC Probe II
ASUS Update
ASUS AI Suite

Form Factor

ATX Form Factor
12 inch x 10.6 inch ( 30.5 cm x 26.9 cm )
* One inch greater than standard ATX form factor
It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Marvell Drivers