TP-Link TD-W8968v4 Router Firmware 151229 Download

Posted at April 27, 2024 by PCI-DB Team

TP-Link TD-W8968v4 Router Firmware 151229 Description

New features/Enhancement:

- Added switch for TR69 enable/disable.
- Added Arp Binding function(Advanced -->Security-->ARP Binding).
- Increased the Pre_share key length from 15 to 255 in IPsec VPN.
- Added Firewall switch in ppp connection.
- Added Iran in wireless country option.

Bug Fixed:

- Fixed the bug when setting PPPoEL2TPPPTP password with 31 special characters in Quick Setup ,the WAN configuration shows error.
- Fixed the bug that it fails when setting 32 characters password for L2TP/PPTP dial up.

Please note:

- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
- Do NOT turn off the power during upgrade.
- Do NOT upgrade the firmware through wireless connection unless the device only has wireless connection;
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before upgrade.

Installation Procedure:

- Log into the ADSL Modem Router by typing http://192.168.1.1 in the address bar of the web browser (such as Internet Explorer, Firefox). The User Name and Password are both admin unless you have changed it before.
- Click Management ->Update Software, click the Browse button to choose the firmware you already extracted in the folder.
- Click the Update Firmware button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
- Click Device Info->Summary, verify that the router’s firmware has been upgraded.
- It is recommended that restoring the device to factory default to make the new functions take effect; Click Management->Settings->Restore Default, Click Restore Default Settings Button.
- After restoring factory default, please login http://192.168.1.1 and re-enter the settings you have written down before upgrading.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers