Intel S2600CW2 Server Board OFU Firmware 1.01.0024 Download

Posted at December 22, 2024 by PCI-DB Team

Intel S2600CW2 Server Board OFU Firmware 1.01.0024 Description

Versions:

- BIOS: 01.01.0024
- ME: 03.01.03.043
- BMC: 01.51.11142
- FRUSDR: 1.17

BIOS 01.01.0024 Changes:

- System Boot Timeout function not working if enable Power On Password
- [E5-2600V4]Run chipsec module "python chipsec_main.py -v -m tools.sw_seq" and "python chipsec_main.py -v -m tools.spi_wrsdis" return failed
- [S2600TP] Serial Port should belong internal device not external device in SMBIOS Type8
- FRB watchdog in BIOS does not work when memory initialization failure happens on S2600TP motherboard
- Fixed FIT table 2K alignment issue.
- [E5-2600 v4] SUT will hang up during POST on BIOS R0023 when power on with single QK7S CPU.
- Update E5-2600 v3 ucode to 0000003c, E5-2600 v4 ucode to 0b00002a
- Update the copyright to 2018

ME 03.01.03.043 Changes:

- Flash from Grantley FW to Grantley-R FW could cause SPS reset.
- System unexpected shutdown with SPS FW exception error.
- ME FW changes P state value when no policy is active imapcting performance.
- C8h command power readings for CPU domain are invalid.

BMC 01.51.11142 Changes:

- CPU Throttles all cores to ~50 MHz on S2600BP and S7200AP nodes in chassis with 2130W PSU
- 2130W PSU predictive failure on S2600BP from across customers and across sites

FRUSDR 1.17 Changes:

- Modify master.cfg to set the 2U Riser 3 fab 2's FRU and Temp sensor.
- Update new FRUSDR utility ( FRUSDR_V14_0_Build9_AllOS ).

System Firmware Update Package Usage instructions

This package can be updated using one of the following methods:
- Windows or Linux operating system using Intel One-boot Flash Update (OFU) V13.1 Build 13
- Windows Preboot Execution Environment (WinPE)

To update from Windows and Linux or operating systems using the Intel One Boot
- Flash Update Utility (OFU)

Use OFU to update system firmware by the following steps:
- Install OFU on Windows or Linux system
- Download the latest firmware update package from http://downloadcenter.intel.com/
- Unzip package to a folder
- Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg

To update from Windows Preboot Execution Environment (WinPE)

The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
- Boot server with customized WinPE CD
- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization)

Update Procedure:

- Unzip the contents of the update package and copy all files to the root directory on a USB flash drive
- Insert the USB flash drive to any available USB port on the server system to be updated
- Power on the server
- The system will automatically access the uEFI shell and begin the update process.

Or

- If the files were copied to a folder other than the root, Boot the Server to the uEFI shell. This can be accessed via the <F2> BIOS setup utility during POST or via the <F6> Boot Menu accessed during POST.
- Run the command "map -r" in the uEFI shell to mount the USB flash drive
- Run the command "fs0:" to change folders to the USB flash drive. The USB flash drive may also mount to fs1: depending on other installed devices. The number of "fs#" is dependent on the result of command "map -r"
- Change folders to the folder holding the update package files and manually start the "Startup.nsh" script file to start loading all updates
- Reboot the system after the update process has successfully completed

Verifying Updates:

- During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
- From the BIOS Setup Utility main menu, Hit the <F9> key to load BIOS Defaults
- At the MAIN menu verify the BIOS revision is correct
- Move cursor to the SERVER MANAGEMENT Menu
- Move cursor down to the SYSTEM INFORMATION Option and hit Enter
- Verify the BMC Firmware revision is correct
- Verify the SDR revision is correct
- Verify the ME Firmware revision is correct
- Configure desired BIOS Option settings
- Hit the F10 Key to save changes and Exit

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

Regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable. 

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers