Ricoh GXR Digital Camera Firmware 1.51 for XP/Vista Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Ricoh GXR Digital Camera Firmware 1.51 for XP/Vista
Category	Scanner Digital Camera Webcam
Manufacturer	Ricoh
File Size	11.6 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit

Ricoh GXR Digital Camera Firmware 1.51 for XP/Vista Description

Fixes:
- Improved the quality of images taken using a combination of negative exposure compensation and Multi-P AUTO white balance.
- The focal length and f-number entered in the lens information for “My Settings” are now correctly recorded in the headers for DNG (RAW) files.
- Addressed an issue in which the color of the display would sometimes change if the shutter button was pressed halfway when the view through the lens was zoomed in.
- The camera now correctly records the colors at the top of color images recorded using color bracketing.

Firmware installation steps:

1. Copy the firmware to the SD memory card.
2. Remove the SD memory card from the PC card reader/card slot and insert it into the camera.
3. Make sure that the camera’s power is turned off.
4. While pressing the (Plus) button, hold down the (Playback) button for 2-3 seconds.
- A confirmation message for the firmware update is displayed on the picture display.
5. Use the Fn2 button to select [Yes], and then press the MENU button.
- The firmware update starts, and the following message is displayed on the picture display. [Transferring firmware]
[Checking camera unit firmware]
[Checking body firmware]
[Updating camera unit firmware]
[Updating body firmware]
[Firmware update complete]
The order that messages are displayed in may differ depending on the firmware version.
6. The camera automatically turns off and restarts.
- After the camera is restarted, the firmware version screen will be displayed, and the update will be completed.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Ricoh Drivers