MikroTik RouterOS MMIPS Firmware 6.41.3 Download

Posted at November 21, 2024 by PCI-DB Team

MikroTik RouterOS MMIPS Firmware 6.41.3 Description

What's new in 6.41.3:

- tile - improved overall system performance and stability ("/system routerboard upgrade" required);
- chr - automatically generate new system ID on first startup;
- console - do not allow variables that start with digit to be referenced without "$" sign;
- defconf - fixed DISC Lite5 LED default configuration;
- export - fixed "/system routerboard mode-button" compact export;
- filesystem - improved error correction process on RB1100AHx4 storage;
- firewall - fixed "tls-host" firewall feature (introduced in v6.41);
- gps - added GPS port support for Quectel EC25-E modem when used in LTE mode;
- lte - fixed r11-LTE-US interface initialization process after reboot;
- romon - make "secret" field sensitive in console;
- smb - improved NetBIOS name handling and stability;
- snmp - fixed w60g SSID value;
- tile - fixed bogus voltage readings;
- tr069-client - fixed TR069 service becoming unavailable when related service package is not available;
- usb - improved packet processing over USB modems;
- winbox - fixed "/tool e-mail send" attachment behavior;
- winbox - fixed maximal ID for Traffic Generator stream;
- winbox - removed "Enable" and "Disable" buttons from IPsec "mode-config" list;
- winbox - show "D" flag under "/ip dhcp-client" menu;
- wireless - removed unused "/interface wireless registration-table monitor" command;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related MikroTik Drivers