MSI H61M-P23 (B3) Intel RST Preinstall Driver 10.5.0.1027 Download
Posted at November 5, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | MSI H61M-P23 (B3) Intel RST Preinstall Driver 10.5.0.1027 |
|---|
| Category | Motherboard |
|---|
| Manufacturer | Intel |
|---|
| File Size | 599 KB |
|---|
| Supported OS | Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit |
|---|
MSI H61M-P23 (B3) Intel RST Preinstall Driver 10.5.0.1027 Description
Fixes:
- If a reboot occurs during a migration and the data is in the migration copy area, the OROM will fail the volume
- Dirty shutdown after max acceleration and I/O causes data miscompare
- RST user interface does not display required data loss warning for existing data on SSD when enabling acceleration
- Copyright dates incorrect
- Smart Response Technology system boot failure (corrupted OS image) after unexpected power loss
- An unexpected error message shows in the user interface when system contains an accelerated volume with SSD space existing and another volume is attempted on the same array
- RST OROM User Interface incorrectly states data will be lost on Cache Disk in Reset to Non-RAID option
- CSMI DeviceIOControl call is returning an invalid value for SATA device position number
- 0x9F BSOD in S3 test with specific SSD
- RAIDCFG32 Accelerate disk mismarked as Unknown Disk when reinserted
- No memory dump file found after the 2nd time the system crashed with an accelerated OS disk
- ZPODD doesn't respond to GESN command
- WHQL: READ CAPACITY (16) Allocation Length Test assertion failure (WLK1.6 BLOCKING)
- WHQL: READ (6) Basic Verification Test assertion failure (WLK1.6 BLOCKING)
- WHQL: MODE SENSE (6) Ensuring mandatory mode pages are supported assertion failure (WLK1.6 BLOCKING)
- WHQL: MODE SENSE (6) Checking Informational Exception Mode Page assertion failure (WLK1.6 BLOCKING)
- WHQL: ASSERTION: READ CAPACITY (10) Negative Test assertion failure (WLK1.6 BLOCKING)
- Accelerate button shows in user interface when using Windows XP
- Certain ODDs sporadically disappear at power on
- 0xD1 BSOD when trying to manually eject powered down ODD
- System sporadically failed to resume from S4
- ZPODD slot drive device does not power after Idle time
- RST user interface does not allow creation of >2TB RAID 5 with array allocation of 50% when creating the volume from a disk
- Black screen or 0x9F BSOD sporadically encountered when running extended S3 cycles
- Hot plug insertion of locked disk hangs system
- Smart Response Technology fails performance criteria for PCMark Vantage: HDD Suite
- RAID 1 Volume on 2 disk matrix array initializes when disk is added to separate matrix array
- Reboot after accelerating >2TB boot volume fails with 0xc000000f error
- Bootable RAID 1 array Failed after BSOD
- Cannot disable acceleration after accelerating a RAID Volume in Enhanced mode
- RAID5:discrepancy between OROM and user interface on degraded RAID5 volume with locked disks
- RAID10:discrepancy between OROM and user interface on degraded RAID10 volume with locked disks
- System fails to resume from hibernate after syncing in the OROM
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related Intel Drivers