MSI G33M Intel 945G VGA Driver 15.12.75.64.1825 for Win7x64 Download

Chipset

- Intel G33 Chipset
- Supports FSB 800/1066/1333MHz.
- Supports dual channel, DDR2 667/800.
- Integrated Intel Graphics Media Accelerator 3100 (Intel GMA 3000)
- Max resolution: 2048x1536X32bpp, Horizontal:127.5KHz Vertical:75Hz
- Maximum shared memory of 256MB
- Supports Microsoft DirectX 9, OpenGL 1.5, Pixel Shader 2.0
- Intel ICH9/ICH9R Chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec, up to 12 ports.
- 2/4 SATAII ports (ICH9/ICH9R) with 2 *eSATA ports with transfer rate up to 3Gb/s.
- PCI Master v2.3, I/O APIC.
- ACPI 2.0 compliant.
- Serial ATA RAID 0/1//0+1/5 or JBOD mode by ICH9R.
- Integrated AHCI controller by ICH9R.
*eSATA function would be fully supported by VISTA ( In Box driver with AHCI driver). eSATA function would not be fully supported without AHCI driver under WinXP.

Main Memory

- Supports four unbuffered DIMM of 1.8 Volt DDR2 SDRAM
- Supports up to 8GB memory size.
- Supports dual channel DDR2 memory architecture.
- Supports DDR2 667/800 memory interface.

Slots

- One PCI Express 16X slot (PCI Express Bus SPEC V1.0a compliant)
- One PCI Express x1 slot. (support PCI Express Bus specification v1.0a compliant)
- Two 32-bit v2.3 master PCI bus slots.
- Support 3.3v/5v PCI bus interface.

On-Board IDE/SATA

- One Ultra DMA 66/100/133 IDE controller integrated in Marvell 88SE6111.
- Supports PIO, Bus Master operation modes.
- Can connect up to two Ultra ATA drives.
- SATAII controller integrated in ICH9/ICH9R and Marvell 88SE6111 chipset
- Up to 3Gb/s transfer speed.
- Supports 2/4 SATAII ports by ICH9/ICH9R with 2 eSATA ports.
- Supports AHCI controller with SATA RAID 0/1/0+1/5 or JBOD mode by ICH9R.
- Supports one SATAII port by 88SE6111.
MSI Reminds You...
- The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

Audio

- Chip integrated by Realtek AL888
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 spec.

LAN

- Supports PCI Express LAN 10/100/1000 Fast Ethernet by Marvell 88E8056.

IEEE1394 / FireWire

- VIA VT6308 chipset
- Supports up to two 1394 ports. (Rear panel x1, pinheader x1)
- Transfer rate is up to 400Mbps.

Internal I/O Connectors

- ATX 24-Pin power connector
- ATX 4-pin 12V power connector
- CPU x 1 / System x 1 FAN connectors
- CD-in connector
- Front panel audio connector
- Front panel connector
- 1 x SPDIF-out pinheader
- 1 x chasis intrusion connector
- 1 x serial port pinheader
- 3 x USB 2.0 connectors
- 1 x Floppy disk drive connector
- 3/5 x Serial ATAII connectors (optional)
- 1 x ATA133 connector
- 1 x IEEE1394 connector support additional 1 port (optional)
MSI Reminds You...
- The floppy disk cable will be optional.

Back Panel I/O Ports

- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 2 x eSATA ports (please refer to Intel website for eSATA function)
- 1 x Graphic Card port
- 1 x 6 in 1 audio jack
- 6 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x IEEE1394 port (optional)

BIOS

- The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
- The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications.

Dimension

- 24.4cm(L) x 24.4cm(W) mATX Form Factor 

About Graphics Driver:

While installing the graphics driver allows the system to properly recognize the chipset and the card manufacturer, updating the video driver can bring about various changes.

It can improve the overall graphics experience and performance in either games or various engineering software applications, include support for newly developed technologies, add compatibility with newer GPU chipsets, or resolve different problems that might have been encountered.

When it comes to applying this release, the installation steps should be a breeze, as each manufacturer tries to make them as easy as possible so that each user can update the GPU on their own and with minimum risks (however, check to see if this download supports your graphics chipset).

Therefore, get the package (extract it if necessary), run the setup, follow the on-screen instructions for a complete and successful installation, and make sure you reboot the system so that the changes take effect.

That being said, download the driver, apply it on your system, and enjoy your newly updated graphics card. Moreover, check with our website as often as possible in order to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers