ASUS DSL-AC88U Router Firmware 1.10.04.460 Download

Posted at April 28, 2024 by PCI-DB Team

ASUS DSL-AC88U Router Firmware 1.10.04.460 Description

Release note:

- This product not affected by KRACKs Security Vulnerabilities, as do not support Client Mode nor Repeater mode and do not support 802.11r.
- Now supports Traffic Manager > Web History feature.
- Support Internet Detection feature, options available PPP Echo/ Disable(WAN > Internet Connection > Account Settings), specifically for PPPoA/PPPoE.
- Include G.fast capability in Auto-Sync mode for DSL modulation.
- xDSL Datapump updated: Combo version A2pvfbH043k. Fixed various xDSL issues.
- xDSL Driver updated: A2x026r. Fixed various xDSL issues.
- Fixed CSRF problem: check whether the address of Referrer HTTP header match with the server address.
- System Log > DSL Log, display FEC counter.
- System Log > DSL Log, display VDSL band status under VDSL mode.
- System Log > DSL Log, display System Vendor ID/ System Vendor Model ID/ Modem Vendor ID.
- System Log > General Log, display temperature of 2.4GHz/ 5GHz/ CPU.
- System Log > General Log, display CPU Model/ CPU Frequency/ CPU Load Average.
- Fixed G.INP/ G.Vectoring DSL Modulation display issue.
- Fine tune the QIS list for Turkey ISP.
- VDSL Profile excludes 30a from Multi mode as there could be issue against legacy DSLAMs(especially with non-BRCM CO) if 30a is enabled by default. 35b will be included in Multi mode in next release.
- Fixed DNS name resolution of DHCP-assigned local IP addresses does not work issue.
- Enhance time accuracy for Guest Network > Access Time and add remaining time support.
- Support countdown for Guest Network > Access Time.
- Fixed undefined issue when Guest Network > remaining time becomes zero.
- Fixed various UI related issues.
- Correct the information to announce user that the App version is up-to-date.
- Add mutex lock for DSL status file.
- Correct DSL Log > Path mode output.
- Fixed UI band 4 channel missing issue, for specific regions.
- Show channel 165 by default 20/40/80MHz bandwidth.
- Fixed Network Map > Client status > IP setting doesn’t work issue.
- Fixed Network Map > Client status > Icon Default failed to work issue.
- Fixed Network Map > Client status > MAC and IP address Binding configured, client should display static instead of dhcp.
- Fixed IE display invalid css layout due to webjsmin removed necessary space issue.
- Extend the QIS waiting time of auto WAN detection.
- Enhance Status Bar: DSL string shown on DSL status icon no matter which modulation used.
- Fixed Wireless > Professional > 2.4GHz band “Reducing USB 3.0 interference“ setting failed to work issue.
- Wireless > Professional > Modulation Scheme, change option value: MCS 7=0, MCS 9=2, MCS 11=1 for 2.4GHz band and MCS 9=0, MCS 11=1 for 5GHz band.
- Wireless > Professional, Tx power adjustment fine tune.
- Wireless > Professional, redesign the Modulation Scheme and add MCS 9 for 2.4GHz band.
- Fixed OpenVPN client ip-down executed fail error.
- Fixed ASUS_usb_path%d_act missing error.
- After setting QIS > PPP username/password, redirect to checking credentials page immediately.
- Redirect to QIS > WiFi info page if WiFi configuration changed, if client connected via WiFi.
- Fixed IPv6 routing issues.
- Disable "Auto select channel including DFS channel“ by default for Auto channel selection.

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASUS Drivers