ASUS DSL-AC88U Router Firmware 1.10.05.502 Download

Posted at December 31, 2024 by PCI-DB Team

ASUS DSL-AC88U Router Firmware 1.10.05.502 Description

Release note:

- Now supports AiProtection/ Parental Control App & Webs filter features with signature update mechanism.
- LAN > DHCP Server > Manually Assigned IP around the DHCP list, now extended to 64.
- Upgrade dnsmasq from v2.58 to v2.78.
- Modify ACSD algorithm by priority for WiFi 5GHz band.
- Administration > System > Time Zone, GMT +9:30 Adelaide option added.
- System Log > DSL Log, SES(Severely Errored Seconds) field added.
- Fine tune WiFi 5GHz throughput.
- Fine tune AU/EU power.
- Change DSL Log > Line Attenuation Upstream display, if 0 then display as N/A.
- Adopt OpenVPN Server speed enhancement.
- Fixed Administration > System > Auto Logout related issue.
- Fixed issue of duplicate printer information.
- Fixed issue of no error message pop-up if restored with invalid Settings file.
- Fixed Administration > System > Enable Web Access from WAN related issue.
- Fixed LAN > Route, UI issue.
- Fixed Primary WAN still displays as connected after removed 3G/4G dongle issue.
- Fixed Primary WAN, NM > WAN IP display issue.
- Fixed Wireless > General, extension channel display issues.
- Fixed the issue of wireless mode and channel bandwidth mismatch issue.
- Fixed JavaScript ReferenceError in USB disk page issue.
- Fixed issue of NM > WAN IP 0.0.0.0 shown when WAN connection type is Automatic IP.
- Fixed there is no value of LAN IPv6 prefix length issue.
- Fixed issue of LAN port 4 failed to work(after setup via QIS > UK > BT IPTV).
- Firewall > URL Filter/Network Services Filter, now default Disabled selected.
- Support WAN interface with VLAN and without VLAN in parallel.
- Fixed DDNS failed to work with WAN connection type PPPoA issue.
- Fixed issue of DHCPv6 Server for LAN side does not assign addresses within the DHCP pool.
- Fixed IPv6 Stateful for LAN doesn’t work properly issue.
- Fixed IPv6 6in4 issues with PPPoE WAN connection type.
- Fixed AiCloud App related issue.
- Fixed auto WAN detection unstable issue.
- Fixed Internet connection suspended for 5 seconds while connecting the 3G/4G dongle issue.
- Fixed issue of IPv6 can’t work in WAN connection type PPPoA.
- Fixed possible Network Map > Client status list empty issue.
- Wireless > General, enable “auto select channel including DFS channel” by default.
- Fixed Traffic Monitor > Daily issue.
- Fixed LAN client can’t use IPv6 to access Internet if using tunnel 6rd issue.
- Fixed issue of USB status update in USB 2.0 section when plugged into USB 3.0 port.
- Fixed ExpressVPN OpenVPN related issue.

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASUS Drivers