Gigabyte GA-945GCM-S2C (rev. 1.0) Realtek LAN Driver 6.250.0908.2011 for Vista Download

Posted at November 21, 2024 by PCI-DB Team

Gigabyte GA-945GCM-S2C (rev. 1.0) Realtek LAN Driver 6.250.0908.2011 for Vista Description

Specifications:

- CPU
Support for an Intel Core 2 Extreme processor/ Intel Core 2 Duo processor/Intel Pentium D processor/ Intel Pentium 4 processor/ Intel Celeron processor in the LGA 775 package
Support for Intel Hyper-Threading Technology
L2 cache varies with CPU
Front Side Bus
(1333)/1066/800/533 MHz FSB

- Chipset
North Bridge: Intel 945GC Express Chipset
South Bridge: Intel ICH7

- Memory
2 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory
Dual channel memory architecture
Support for DDR2 667/533/400 MHz memory modules

- Onboard Graphics
Integrated in the North Bridge

- Audio
Realtek ALC662 codec
High Definition Audio
2/4/5.1-channel
Support for S/PDIF Out
Support for CD In

- LAN
RTL 8101E chip (10/100 Mbit)

- Expansion Slots
1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots

- Storage Interface
South Bridge:
1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
iTE IT8718 chip:
1 x floppy disk drive connector supporting up to 1 floppy disk drive

- USB
Integrated in the South Bridge
Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

- Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x floppy disk drive connector
1 x IDE connector
4 x SATA 3Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x CD In connector
1 x S/PDIF Out header
2 x USB 2.0/1.1 headers
1 x chassis intrusion header
1 x power LED header

- Back Panel Connectors
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x parallel port
1 x serial port
1 x D-Sub port
4 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks (Line In/Line Out/Microphone)

- I/O Controller
iTE IT8718 chip

- H/W Monitoring
System voltage detection
CPU temperature detection
CPU/System fan speed detection
CPU overheating warning
CPU/System fan fail warning
CPU fan speed control

- BIOS
1 x 4 Mbit flash
Use of licensed AWARD BIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers