Gigabyte GA-945GCM-S2C (rev. 1.0) BIOS F3 Download

Posted at December 22, 2024 by PCI-DB Team

Gigabyte GA-945GCM-S2C (rev. 1.0) BIOS F3 Description

Specifications:

CPU:
- Support for an Intel Core 2 Extreme processor/ Intel Core 2 Duo processor/Intel Pentium D processor/ Intel Pentium 4 processor/ Intel Celeron processor in the LGA 775 package
- Support for Intel Hyper-Threading Technology
- L2 cache varies with CPU
- Front Side Bus (1333)/1066/800/533 MHz FSB

Chipset:

- North Bridge: Intel 945GC Express Chipset
- South Bridge: Intel ICH7

Memory:

- 2 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory
- Dual channel memory architecture
- Support for DDR2 667/533/400 MHz memory modules

Onboard Graphics:

- Integrated in the North Bridge

Audio:

- Realtek ALC662 codec
- High Definition Audio
- 2/4/5.1-channel
- Support for S/PDIF Out
- Support for CD In

LAN:

- RTL 8101E chip (10/100 Mbit)

Expansion Slots:

- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots

Storage Interface:

- South Bridge:
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
- iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB:

- Integrated in the South Bridge
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x chassis intrusion header
- 1 x power LED header

Back Panel Connectors:

- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller:

- iTE IT8718 chip

H/W Monitoring:

- System voltage detection
- CPU temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU fan speed control

BIOS:

- 1 x 4 Mbit flash
- Use of licensed AWARD BIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Gigabyte Drivers