Intel S2600KPR Server Board EFI BIOS/Firmware 1.01.0024 Download

Posted at December 3, 2024 by PCI-DB Team

Intel S2600KPR Server Board EFI BIOS/Firmware 1.01.0024 Description

Versions:

- System BIOS: R01.01.0024
- ME Firmware: 03.01.03.043
- BMC Firmware: 01.51.11021
- FRUSDR: 1.16

BIOS 01.51.11021 Changes:

- Undefined login fields on EWS Login Page with Internet Explorer 11
- SDR recent-erase timestamp is cleared after loading BMC defaults
- HDD fault LED issue on S2600KP KDK(12X3.5 HSBP)
- PSU2 reports 'a predictive failure for the power supply' after idle.
- [BMC][rKVM] Some settings shows of rKVM "keyboard" and "Mouse" are difference when rKVM video changed between Window mode and Full Screen mode.
- [BMC][Media Redirection] It pop-up error message "Floppy redirection failed to start" when trying to mount a floppy image from rKVM.
- add password authentication in SSH connection on SMASH function
- update 1600w PSU fw to v75 supporting HW version from 00A to 08A
- When using the Chinese browser and http protocol to log in BMC, BMC EWS display in English.
- The "Alt+Ctrl+Del" on rKVM "keyboard" pull-down menu doesn't work on special condition.
- ITAS tool get Health L.E.D status BLINK error during 700 cycles AC/DC power cycling test. Expected L.E.D status is ON.
- S7200AP Media Redirection - Floppy/USB - "Floppy Redirection Failed to Start"
- REACT libgcrypt issue
- Add 1100W PSU Fw to support HW rev 02F
- update 2300W PSU FW from 30 to 31
- update PSoc to v1.41
- rollback CCB1936's implementation
- Disable/Enable IPMI network ports by IPMI command and EWS

Please follow the below procedure to update ME using UEFI iFlash32 14.0 Build 11

1. Boot the system to EFI Shell
2. Download ME release package
3. Unzip the ME release package to HD or USB Flash Drive
4. Map the respective storage device in system with the command Shell> map -r
5. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:)
6. Run the IFlash32 utility on the prompt. Use ME_xx_xx_xx_xxx.cap file when ME operational Image update is required. Use MEComplete_xx_xx_xx_xxx.cap file when Only whole ME Image update is required. fs0:> IFlash32 [File Name] /u /ni
7. Reboot system after the update is completed.

Use OFU to update system firmware by the following steps:

- Install OFU on Windows or Linux system
- Download the latest firmware update package from http://downloadcenter.intel.com/
- Unzip package to a folder
- Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg

To update from Windows Preboot Execution Environment (WinPE)

The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
- Boot server with customized WinPE CD
- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization)

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

Regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.
- System BIOS: R01.01.0024
- ME Firmware: 03.01.03.043
- BMC Firmware: 01.51.11021
- FRUSDR: 1.17

System Firmware Update Package Usage instructions

This package can be updated using one of the following methods:
- Windows or Linux operating system using Intel One-boot Flash Update (OFU) V13.1 Build 13
- Windows Preboot Execution Environment (WinPE)

To update from Windows and Linux or operating systems using the Intel One Boot
- Flash Update Utility (OFU)

Use OFU to update system firmware by the following steps:
- Install OFU on Windows or Linux system
- Download the latest firmware update package from http://downloadcenter.intel.com/
- Unzip package to a folder
- Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg

To update from Windows Preboot Execution Environment (WinPE)

The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
- Boot server with customized WinPE CD
- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization)

Update Procedure:

- Unzip the contents of the update package and copy all files to the root directory on a USB flash drive
- Insert the USB flash drive to any available USB port on the server system to be updated
- Power on the server
- The system will automatically access the uEFI shell and begin the update process.

Or

- If the files were copied to a folder other than the root, Boot the Server to the uEFI shell. This can be accessed via the <F2> BIOS setup utility during POST or via the <F6> Boot Menu accessed during POST.
- Run the command "map -r" in the uEFI shell to mount the USB flash drive
- Run the command "fs0:" to change folders to the USB flash drive. The USB flash drive may also mount to fs1: depending on other installed devices. The number of "fs#" is dependent on the result of command "map -r"
- Change folders to the folder holding the update package files and manually start the "Startup.nsh" script file to start loading all updates
- Reboot the system after the update process has successfully completed

Verifying Updates:

- During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
- From the BIOS Setup Utility main menu, Hit the <F9> key to load BIOS Defaults
- At the MAIN menu verify the BIOS revision is correct
- Move cursor to the SERVER MANAGEMENT Menu
- Move cursor down to the SYSTEM INFORMATION Option and hit Enter
- Verify the BMC Firmware revision is correct
- Verify the SDR revision is correct
- Verify the ME Firmware revision is correct
- Configure desired BIOS Option settings
- Hit the F10 Key to save changes and Exit

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

Regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable. 

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers