GitUp GIT2 Action Camera Firmware 1.3 Download

Posted at November 5, 2024 by PCI-DB Team

GitUp GIT2 Action Camera Firmware 1.3 Description

Change log:

1. Added: 4:3 video mode, 1920*1440 30fps video resolution.
2. Added: Menu selection of remote control operation modes: “Standard”, “Quick Shoot”.
3. Added: Self timer delay for photo mode, menu selection from: 3S, 5S, 10S, 15S, 30S.
4. Added: Menu selection of USB modes: Web camera, Mass storage.
5. Added: Czech language.
6. Improved: Screen-saver operation during photo time lapse.
7. Improved: Support for 64GB and 128GB cards, using FAT32 format.
8. Improved: Battery indicator.
9. Improved: Recorded audio volume adjustment.
10. Improved: Back red LED and front green LED will blink while upgrading with new firmware.
11. Improved: Russian language translation.
12. Improved: Video files now limited to 4GB file size instead of 15 minutes file time.
13. Fixed: AE lock and AWB lock during loop recording.
14. Fixed: Image shake issue on 720P video mode while Gyro stabilization enabled.
15. Fixed: Custom shutter speed issues - double exposure time and low ISO image brighter than higher ISO

Regarding the remote control quick working mode, works as below:
1) Video Button: Start recording immediately in standby mode;
2) Photo Button: Take a video snapshot while in recording or take a photo in standby mode;
3) Power off Button: Stop Recording;
4) Wi-Fi Button: Enable/Disable Wi-Fi.

Installation steps:

1. Use max. 32GB card formatted by camera or on computer as FAT32
2. Insert card in camera and connect it to computer using USB cable
3. Copy just the GIT2LD.bin on the root of the card
4. After GIT2LD.bin is copied to the card disconnect the camera from computer
5. Reconnect the camera to your computer and wait few seconds until you can chose Mass Storage from camera menu
6. Delete GIT2LD.bin from the card using your PC and
7. Copy the GIT2FW.bin file on the root of the card
8. Reconnect the camera to your computer and wait more seconds until you can chose Mass Storage from camera menu, the front green LED and back red LED will be blinking while upgrading.

How to connect Git2 with the wireless router?

1. Set the Wi-Fi mode on AP mode
2. Put the client.txt file in the SD card root directory, change the SSID and password
3. If set the Wi-Fi auto start option as off, you need long press the Wi-Fi button to enable the Wi-Fi and then connect the router automatically.
4. If set the Wi-Fi auto start option as on, it will connect with router automatically after powered on.

Note:

For the Wi-Fi AP mode, if you set the Wi-Fi auto start option as on, it require to restart the camera to enable Wi-Fi automatically.

About Action Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers