MikroTik RouterOS SMIPS Firmware 6.32.4 Download

Posted at December 22, 2024 by PCI-DB Team

MikroTik RouterOS SMIPS Firmware 6.32.4 Description

What's new:

- Contains all relevant fixes that was confirmed till v6.34 release.
- address-list - properly remove unused address-lists from drop-downs;
- arp - show incomplete ARP entries;
- bridge - fixed power-cycle-ping for bridge ports (was affecting all bridge);
- bridge firewall - fixed crash when jump rule points to disabled custom chain;
- btest - fix potential crash after btest release;
- btest - improve UDP tx rate precision;
- crypto - fixed kernel failure in talitos HW encryption;
- dhcpv6-client - fix DNS address assignement;
- dhcpv6-client - set correct parameters when rapid commit is used
- e-mail - do not reset server address after changing configuration;
- email - make password field sensitive in console.
- ethernet - fixed link resetting on power-cycle-ping value change;
- fastpath - fixed possible kernel failure on multi core systems;
- fastpath - show fp counters in /interface monitor aggregate;
- fetch - added 30 second connection time-out;
- fetch - fixed closure after 30 seconds;
- hotspot - added missing favicon.ico in hotspot html pages;
- hotspot - fixed missing image at login;
- ipsec - fixed kernel failure after underlying tunnel has been disabled/enabled;
- kernel - general improvement for core process scheduling;
- lcd - fixed LCD crash on fast disable/enable;
- lcd - refresh LCD after display command is executed;
- led - add WLAN led to RB951Ui
- log - log link up/down events only when link actually has changed its state;
- log - reopen log file if deleted;
- lte - improve support Sierra Wireless 320U;
- lte - speed up first time connection to LTE network on SXT LTE;
- net - apply slave config only if master config has been changed;
- net - do not show L2MTU in VLAN compact export;
- netinstall - fix branding pack parsing;
- netwatch - make work with ping time-out more precise;
- packages - show version tag when no bundle is installed.
- packing - fix tcp/udp checksums when simple packing is used;
- ppp - do not allow empty name ppp secrets;
- ppp - fixed dynamic filter rule adding on some firewall filter configurations;
- ppp - make PPP active print radius & !radius conditions work;
- romon - allow to see device identity if it is longer than 31 character;
- romon - do not accept multicast id;
- romon - fixed crash on RoMON if fast-path was active;
- smb - fix crash when changing user which has open session;
- smb - fixed SMB share crash when connection was cancelled;
- smb - show correct interface name in SMB debug logs;
- ssh - avoid double session clean-up;
- ssh - fix active user accounting;
- ssh - fix key exchange when first kex packet follows.
- ssh - fix session clean-up;
- sshd - resolved shared secret mismatch issue;
- tile - fix ipsec freeze after SA updates;
- tile - fixed kernel failure on HW encryption;
- upnp - fixed memory leak;
- upnp - fixed missing in-interface option for dynamic dst-nat rules;
- vrrp - allow VRRP to work behind firewall and NAT rules;
- vrrp - do not warn about version mismatch if VRID does not match;
- vrrp - fix arp=reply-only;
- vrrp - fix enabling disabled vrrp interface when vrrp program has exited;
- vrrp - fixed on-backup script;
- vrrp - make sure that VRRP gets state on bootup;
- webfig - didn't show zero values in CRS ingress/egress VLAN translation rules;
- webfig - fixed firewall connection-bytes option;
- webfig - show correctly SFP Tx/Rx;
- winbox - added + & - to IGMP proxy MFC;
- winbox - allow to specify traffic-monitor threshold in k & M units + specify that those are bits;
- winbox - do not send any changes on OK button press if nothing has been changed;
- winbox - fixed tab names to correspond to console;
- winbox - fixed tab names to correspond to console;
- winbox - renamed power-cycle-ping-interval to power-cycle-ping-timeout;
- winbox - show dhcp server name in dhcp leases;
- winbox - show fast-path per interface counters;
- winbox - show only actual switch-cpu ports in switch setting combobox;
- winbox - show properly route-distinguisher for bgp vpn4;
- winbox/webfig - fixed version column ordering in ip neighbors list.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related MikroTik Drivers