Intel R1304WTTGSR Server System BIOS/Firmware 1.01.0024 Download

Posted at December 22, 2024 by PCI-DB Team

Intel R1304WTTGSR Server System BIOS/Firmware 1.01.0024 Description

Versions:

- System BIOS: R01.01.0024
- ME Firmware: 03.01.03.043
- BMC Firmware: 01.51.11021
- FRUSDR: 1.17
- iFlash32.efi: Version 14.0 Build 12
- fwpiaupd.efi: Version 14.0 Build 9
- frusdr.efi: Version 14.0 Build 11

System Firmware Update Package Usage instructions

This package can be updated using one of the following methods:
- Windows or Linux operating system using Intel One-boot Flash Update (OFU) V13.1 Build 13
- Windows Preboot Execution Environment (WinPE)

To update from Windows and Linux or operating systems using the Intel One Boot
- Flash Update Utility (OFU)

Use OFU to update system firmware by the following steps:
- Install OFU on Windows or Linux system
- Download the latest firmware update package from http://downloadcenter.intel.com/
- Unzip package to a folder
- Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg

To update from Windows Preboot Execution Environment (WinPE)

The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
- Boot server with customized WinPE CD
- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization)

Update Procedure:

- Unzip the contents of the update package and copy all files to the root directory on a USB flash drive
- Insert the USB flash drive to any available USB port on the server system to be updated
- Power on the server
- The system will automatically access the uEFI shell and begin the update process.

Or

- If the files were copied to a folder other than the root, Boot the Server to the uEFI shell. This can be accessed via the <F2> BIOS setup utility during POST or via the <F6> Boot Menu accessed during POST.
- Run the command "map -r" in the uEFI shell to mount the USB flash drive
- Run the command "fs0:" to change folders to the USB flash drive. The USB flash drive may also mount to fs1: depending on other installed devices. The number of "fs#" is dependent on the result of command "map -r"
- Change folders to the folder holding the update package files and manually start the "Startup.nsh" script file to start loading all updates
- Reboot the system after the update process has successfully completed

Verifying Updates:

- During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
- From the BIOS Setup Utility main menu, Hit the <F9> key to load BIOS Defaults
- At the MAIN menu verify the BIOS revision is correct
- Move cursor to the SERVER MANAGEMENT Menu
- Move cursor down to the SYSTEM INFORMATION Option and hit Enter
- Verify the BMC Firmware revision is correct
- Verify the SDR revision is correct
- Verify the ME Firmware revision is correct
- Configure desired BIOS Option settings
- Hit the F10 Key to save changes and Exit

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

Regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable. 

About SmartWatch Firmware:

Changing the SmartWatch's firmware version can increase its overall performance and stability, enhance various applications or improve their auto-update methods, as well as bring several other changes that might be useful for your device.

So if you consider applying this release, make sure you have read and understood the installation steps, and back up all your important files from the device.

As far as the update method is concerned, usually, you must get the downloadable package (extract it if necessary), transfer it to the SmartWatch through the available USB cable or via a compatible memory card, go to the setup menu's firmware upgrade section, and initiate the process.

Therefore, if you wish to upgrade your SmartWatch's firmware to this version, hit the download button and get the desired package. Moreover, don't forget to check with our website as often as possible in order to stay up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers