Nikon D4 Camera Firmware 1.11 for macOS Download

Posted at November 21, 2024 by PCI-DB Team

Nikon D4 Camera Firmware 1.11 for macOS Description

Added the following supports for AF-P lenses:

- If the standby timer expires after focusing, the focus position will no longer change when the timer is reactivated.
- When focus is adjusted by rotating the lens focus ring, the focus indicator in the viewfinder (and in live view, the focus point in the monitor) now flash to indicate when infinity or the minimum focus distance is reached.

Fixed the following issue:

- Added support for AF-P DX lenses.
- When photos were taken using Camera Control Pro 2 after Custom Setting d10 (Exposure delay mode) was enabled in the CUSTOM SETTING MENU, the software would sometimes mistakenly display a message stating that no photo could be taken.

How to verify your camera’s current firmware version

- Turn on the camera.
- Press the MENU button to display the menu screen.
- Select the Setup Menu.
- Select Firmware version.
- The camera's firmware version will be displayed.
- Turn off the camera.

Basic Firmware Upgrade Instructions

- Create a new folder with an appropriate name on your computer's hard drive.
- Download the Windows (.EXE) or Mac (.DMG) file and run it to create a folder called D4Update which contains the .bin file.
- Use a card reader or similar device to copy the .bin file to the root directory of a memory card formatted in the camera.
- Insert the memory card into the camera's primary memory card slot and turn on the camera.
- Select Network from the setup menu and be sure that Disable is selected for Network connection.
- Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers