TRENDnet TV-IP302PI v1.0R IP Camera Firmware 1.02.38 Download

Posted at December 18, 2024 by PCI-DB Team

TRENDnet TV-IP302PI v1.0R IP Camera Firmware 1.02.38 Description

Changes:

- Accept up to 32 character passwords with special characters
- Improved compatibility with TRENDnet NVR
- Fixed Security Issue

Warning:

- Always upgrade firmware with a wired connection.
- Do not interrupt the connection while doing the firmware upgrading
- It is necessary to perform a factory reset after the firmware upgrade.
- If you would like to keep your original setting, please back up your configuration first before upgrading the firmware.

Firmware Upgrade:

- Download and unzip the firmware file.
- Open a browser and go to your camera’s IP address (default is 192.168.10.30 if you do not have a DHCP server)
- Enter the username & password of the camera (By default, the username & password is admin/admin)
- Go to Setup page, Tools tab then Firmware Upgrade option
- Click Browse to select the new firmware file then click Upgrade.
- Click OK.
- Wait until the firmware writing progress completed.
- Close the window and re-login.
- After login, click System/Tools tab again to check the new firmware version.
- Your firmware upgrade is now completed. To find the camera IP, please use the Install Camera or IPInstaller (can be found on the CD-ROM) to search and configure your camera again)

About Surveillance/Network Cameras:

Applying the appropriate software for your network camera helps computers properly connect with the device, and adds support for various surveillance features that the camera benefits from (such as monitoring specific areas).

If you’re considering a software upgrade, you should know that this process might improve the unit’s overall performance and stability, add support for new features (or enhance existing ones), or include fixes for various issues. However, bear in mind that not all software updates bring significant changes.

As for the installation method, the steps vary depending on the type of software that you are about to apply; so, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device.

If you're thinking about applying this software version, hit the download button and update your camera once you have familiarized yourself with the installation method. In addition to that, don’t forget to check with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers