ASUS RT-N65U Router Custom Firmware 3.0.3.8.081 Base Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ASUS RT-N65U Router Custom Firmware 3.0.3.8.081 Base
Category	Router Switch Access Point
Manufacturer	ASUS
File Size	7.2 MB
Supported OS	OS Independent

ASUS RT-N65U Router Custom Firmware 3.0.3.8.081 Base Description

This package includes a customized firmware developed by Padavan that is targeted at some of ASUS’ routers. The present build brings new improvements, functions, bug fixes, and configurations, and can also boost the overall performance of the device.

ATTENTION:

1) After the first upgrade from official firmware, all settings will be erased. Do not load settings (CFG file) from official firmware!!!
2) If your current custom firmware version is N56U 1.1.2.2-006 or lower, it is absolutely necessary to save your settings to a .CFG file using WebGUI BEFORE upgrading to a newer version. After the upgrade, restore your settings from the saved .CFG file in a usual way.

WARNING: Features NO LONGER AVAILABLE:

- WPS/WSC (completely disabled due to the serious security hole).
- ASUS Download Master is no longer supported. It was replaced by Transmission.

Changes:

- Fixed WAN DHCP6C client IA-ID (now generated from WAN MAC).
- Fixed SSH brute-force protection mode "Max 3 tries/60 min".
- Fixed infinite loop in xUPnPd plugin "xupnpd_ivi".
- Added support Stateful mode for LAN DHCPv6 server.
- Added support 802.1x EAP-TTLS and EAP-PEAP WAN authentication.
- Added support static WAN DNS 3.
- Added support store system time to Internal Storage (/etc/storage).
- Added support custom exports file /etc/storage/exports for NFS server.
- Added NTP client callback, improve reliability.
- Added WiFi Guest AP control to WPS button behaviour.
- Updated OpenSSL to v1.0.1g (vulnerability CVE-2014-0160).
- Updated OpenVPN to 2.3.3.
- Updated miniupnpd to 1.8.20140401.
- Updated usb-modeswitch to 2.1.1, updated usb-modeswitch-data up to 2014-03-27.
- Updated miniDLNA from upstream.
- Updated xUPnPd to rev398.
- Updated Entware new URLs.
- Updated Linux kernel code from upstream.
- Updated uClibc inet code from upstream.
- Improved WebUI render under IE11.
- Improved WebUI response.

Base build Description:

[x] Linux kernel-3.0.101+ (with upstream backports).
[x] IPv6 full support (native and SIT tunnels).
[x] NTFS filesystem (Paragon ufsd 8.6 for ASUS).
[x] FAT16/FAT32/exFAT filesystem.
[x] EXT4/EXT3/EXT2 filesystem (EXT3/EXT2 via EXT4 driver).
[x] FUSE kernel modules.
[x] UVC camera kernel modules.
[x] NFS kernel modules (NFSv2/3 client/server).
[x] CIFS client kernel modules.
[x] IPSET kernel modules.
[x] LPR printing daemon.
[x] USB-over-Ethernet printing daemon.
[x] dropbear (SSH client/server).
[x] sftp (SSH FTP server).
[x] vsftpd (FTP server).
[x] samba (SMB server).
[x] xupnpd (multicast IPTV->UPnP proxy).
[x] openvpn (security VPN client/server).
[x] https server for WebUI.
[+] openssl binary (allow generate certificates for openvpn/https).
[+] tcpdump utility.
[-] minidlna (UPnP/DLNA A/V mediaserver).
[-] firefly (iTunes audio mediaserver).
[-] transmission (torrent client).
[-] aria2 (multi-protocol download manager).
[-] QoS kernel modules.
[-] IFB/IMQ kernel modules.
[-] USB HID kernel modules.
[-] XFS filesystem.
[-] openssh (BSD SSH client/server).
[-] parted utility.
[-] Stripped debug messages from Samba server.

Note:

- [x] > Mandatory
- [+] > Included
- [-] > Excluded

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASUS Drivers