Rollei eGimbal G1 Steadycam Firmware 8.22 Download

Posted at April 28, 2024 by PCI-DB Team

Rollei eGimbal G1 Steadycam Firmware 8.22 Description

Rollei eGimbal G1 electronical Steadycam for GoPro Hero3 / Hero 3 Plus

- Lighter and smaller electronic stabilizer - just perfect to film from the hand 
- Easy to attach to the sport helmets, and Rollei Mogopod 1 
- Adjustable angle on the handle - 45 degree handle 
- Receiving area inclination angle of max. 110 ° to bottom and from max. 45 ° upwards 
- Easy to calibrate

Manual Software Update Rollei eGimbal G1

1. Download the firmware update for the Rollei eGimbal G1. Unzip the file. You will receive a new file named iFootage8.22_02.xfw
2. Insert a battery into the Rollei eGimbal G1.
3. Connect the Rollei eGimbal G1 with a USB cable to your computer.
4. The Rollei eGimbal G1 is recognized as a new removable drive.
5. Copy the update file IFootage8.22_02.xfw directly on the removable disk, which was created when connecting the Rollei eGimbals G1.
6. Disconnect the USB cable from the Rollei eGimbal G1 and then immediately reconnect the Rollei eGimbal G1. After the Rollei eGimbal G1 appears again as a removable disk on your computer, the firmware update is completed. Remove the USB cable.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers