Gigabyte GA-965GM-S2 (rev. 1.0) Microsoft UAA Driver 5.10.0.5010 Download

Posted at December 22, 2024 by PCI-DB Team

Gigabyte GA-965GM-S2 (rev. 1.0) Microsoft UAA Driver 5.10.0.5010 Description

Specifications:

- CPU
Supports Intel Core2 Extreme Quad-Core / Core2 Duo / Intel Pentium Extreme/ Intel Pentium D processor
Supports 1066/800/533 MHz FSB

- Chipset
Northbridge: Intel G965 Express Chipset
Southbridge: Intel ICH8
Marvell 8056 Gigabit LAN Controller
GIGABYTE SATAII controller
Realtek ALC883 8 Channel Audio Codec

- Memory
Supports DDR2 800/667/533 memory
Dual Channel architecture support up to 8GB by 4 DIMM slots
Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

- Expansion Slots
1 PCI Express X16 slot
1 PCI Express X1 slot
2 PCI slots

- Form Factor
Micro ATX form factor, 244 x 244mm

- Internal I/O Connectors
1 24-pin ATX power connector
1 4-pin ATX 12V power connector
1 floppy connector
1 IDE connector
6 SATA 3Gb/s connectors
1 CPU fan connector
1 system fan connector
1 front panel connector
1 front audio connector
1 CD In connector
3 USB 2.0/1.1 connectors for additional 6 ports by cables
1 SPDIF In/Out connector
1 COM port connector
2 IEEE1394a connectors for additional 2 ports by cable
1 power LED connector
1 Chassis Intrusion connector

- Back Panel Connectors
1 PS/2 keyboard port
1 PS/2 mouse port
1 parallel port
1 VGA port
1 serial port (COMA)
4 USB 2.0/1.1 ports
1 IEEE1394a port
1 RJ-45 port
6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)

- H/W Monitoring
System voltage detection
CPU / System temperature detection
CPU / System fan speed detection
CPU warning temperature
CPU / System fan failure warning
CPU Smart Fan Control

- BIOS
1 8 Mbit flash ROM
Use of licensed AWARD BIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Microsoft Drivers