Biostar TA890GXE Ver. 5.0 ITE CIR Driver 1.0.1.9 for XP Download

Posted at December 22, 2024 by PCI-DB Team

Biostar TA890GXE Ver. 5.0 ITE CIR Driver 1.0.1.9 for XP Description

Specifications:

Chipset:
- AMD 890GX / SB850

CPU SUPPORT:

- AMD Phenom II X6 Processor
- AMD Phenom II X4 Processor
- AMD Phenom II X3 Processor
- AMD Phenom II X2 Processor
- AMD Athlon II X4 Processor
- AMD Athlon II X3 Processor
- AMD Athlon II X2 Processor
- AMD Sempron Processor
- Maximum CPU TDP (Thermal Design Power): 140Watt

HT:

- Support HT3.0 up to 5.2GT/s (Depends on AMD CPU Specification)

MEMORY:

- Support Dual Channel DDR3 1600(OC) / 1333 / 1066 / 800 MHz
- 4 x DDR3 DIMM Memory Slot
- Max. Supports up to 16GB Memory

EXPANSION SLOT:

- 1 x PCI-E x16 2.0 Slot
- 1 x PCI-E x1 2.0 Slot
- 2 x PCI Slot

STORAGE:

- 5 x SATA3 Connector
- 1 x IDE Connector
- Support SATA RAID: 0,1,5,10

USB:

- 4 x USB 2.0 Port
- 3 x USB 2.0 Header

IEEE 1394:

- VIA VT6330
- 1 x IEEE 1394a Port
- 1 x IEEE 1394a Header

LAN:

- Realtek RTL8111DL - 10/100/1000 Controller

INTEGRATED VIDEO:

- ATI Radeon HD4290 Graphics with 128MB DDR3 Side-port memory, Max. Memory Share Up to 512 MB
- Support ATI Hybrid Crossfire

CODEC:

- Realtek ALC892 8-Channel Blu-ray Audio

REAR I/O:

- 1 x PS/2 Mouse
- 1 x PS/2 Keyboard
- 1 x eSATA2 Connector
- 1 x FireWire IEEE 1394a Port
- 4 x USB 2.0 Port
- 1 x HDMI Connector
- 1 x DVI-D Connector
- 1 x VGA Port
- 1 x RJ-45 Port
- 6 x Audio Connector
- 1 x S/PDIF Out Port

INTERNAL I/O:

- 3 x USB 2.0 Header
- 5 x SATA3 6Gb/s Connector
- 1 x IDE Connector
- 1 x Front Audio Header
- 1 x Front Panel Header
- 1 x S/PDIF-OUT Header
- 1 x CPU FAN Header
- 2 x System FAN Header
- 1 x Serial Header
- 1 x FireWire IEEE 1394 Header
- 1 x CIR Header

DIMENSION:

- Micro ATX Form Factor Dimension: 24.4cm X 24.4cm ( W x L )

FEATURES:

- Supports BIO-Remote
- Supports GTO666
- Supports GT60
- Windows 7 Compatible
- Supports Phenom II x6
- Supports AM3
- Supports 100% Solid capacitor
- Supports Tweak Tech
- Supports Clean-Tone
- Supports O.N.E
- Supports Rapid Switch
- Supports Rapid Debug
- Supports BIOS-Flasher
- Supports GPU

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ITE Drivers