Google Nexus 7 [2013] (Mobile) Firmware Android 6.0.1 MMB29Q Download

Posted at November 5, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Google Nexus 7 [2013] (Mobile) Firmware Android 6.0.1 MMB29Q
Category	Tablets
Manufacturer	Google
File Size	511.1 MB
Supported OS	Android

Google Nexus 7 [2013] (Mobile) Firmware Android 6.0.1 MMB29Q Description

This package provides the factory image "razorg" for Nexus 7 [2013] (Mobile).

If you’re not sure what version of Android your Nexus or Google Play edition device is running, follow these steps:

- Open your device’s Settings menu (devices running Android 4.3 or lower have a different Settings icon ).
- Under "System" settings, touch About phone or About tablet Android version.
The number displayed is your device’s version number.

To flash a system image:

- Download the appropriate system image for your device below, then unzip it to a safe directory.
- Connect your device to your computer over USB.
- Start the device in fastboot mode with one of the following methods:
Using the adb tool: With the device powered on, execute:
adb reboot bootloader
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
- If necessary, unlock the device's bootloader by running:
fastboot oem unlock
The target device will show you a confirmation screen. (This erases all data on the target device.)
- Open a terminal and navigate to the unzipped system image directory.
- Execute the flash-all script. This script installs the necessary bootloader, baseband firmware(s), and operating system.

Once the script finishes, your device reboots. You should now lock the bootloader for security:
- Start the device in fastboot mode again, as described above.
Execute:
fastboot oem lock

Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.

About Tablet Firmware:

By applying this firmware, your tablet can benefit from improved system stability, network-related functions and performance, enhanced touch experience, various fixes for problems encountered throughout the device’s usage time, as well as several other changes.

The installation process isn’t much of a hassle because each manufacturer tries to make it as easy as possible: usually, you must transfer the new firmware to the tablet, and initiate the upgrade from the setup menu.

However, due to the large number of tablets and manufacturers, as well as various ways for entering update mode, we recommend that you read the installation guide, and perform the upgrade only once you have familiarized yourself with the steps.

Bear in mind that, before you get this release, you must check to see if the available firmware is developed for your tablet model and SKU (stock keeping unit) – if you apply an incompatible software, the device will encounter serious malfunctions and can even be rendered unusable.

Therefore, if this package is developed for your tablet, click the download button, refer to the update instructions, and apply the new firmware. Also, don’t forget to constantly check our website so that you don’t miss any new releases.   

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Google Drivers