Aztech HW553 Router Firmware 220.106.2-010 Download

Posted at April 29, 2024 by PCI-DB Team

Aztech HW553 Router Firmware 220.106.2-010 Description

Changes:

1. Additional support for following USB 3G modems
a. Alcatel X220
b. BMobile
c. Huawei E1782
d. Huawei E367
e. Huawei E1820
f. Onda MT833UP
g. Prolink PHS101
h. ZTE K3565-Z

Firmware Upgrade Instructions:

Note: Please use WIRED connection (Ethernet cable) in upgrading the firmware.

1. Connect your PC to the HW553’s Ethernet LAN port beside the Power Jack using an Ethernet cable.
2. Login to your HW553 Web User Interface, type in 192.168.2.1 on your web browser.
3. Type admin/admin for the Username and Password. You will be routed the Aztech WEB User Interface.
4. Click Advanced Mode and then go to System>Firmware> click the Browse button then select the latest firmware then press OK.
5. Click the Upgrade button once you have selected the latest firmware for HW550-3G.
6. Please DO NOT TURN OFF or Reset the router when the unit is being upgraded. (Note: Firmware Upgrading may take up to 9 minutes)
7. Once the Upgrade is completed, please REBOOT the unit.
8. Under Advanced Mode go to System>Reboot> click Reboot button.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Aztech Drivers