Posted at November 2, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Edimax ES-5808P Switch Firmware 100817 |
---|---|
Category | Router Switch Access Point |
Manufacturer | Edimax |
File Size | 176 KB |
Supported OS | OS Independent |
- Complies with IEEE 802.3/802.3af/802.3x/802.1p/802.1q standards
- Supplies 48V/DC with 15.4W output per port
- Store-and-Forward architecture
- Provides port based remote power On/Off to restart connected PoE devices individually
- Supports Auto MDI/MDI-X and Auto-Negotiation
- Supports 4-group port based VLAN, and password-protected configuration
- Save the downloadable package;
- Log into the switch’s web user interface;
- Navigate to the firmware upgrade section of your device;
- Select the available firmware and configure your router to install the package;
- Wait for the device complete update process;
- Reboot the unit;
Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.
Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.
Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.
It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.
That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Network Card File Size: 199 KB Windows XP
Install DriverDevice Type: Router Switch Access Point File Size: 1.3 MB OS Independent
Install DriverDevice Type: Firmware File Size: 2 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit
Install DriverDevice Type: Router Switch Access Point File Size: 1.3 MB OS Independent
Install DriverDevice Type: Network Card File Size: 797 KB Windows 7
Install DriverDevice Type: Network Card File Size: 196 KB Windows XP 64 bit
Install DriverDevice Type: Network Card File Size: 10.1 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit
Install DriverDevice Type: Network Card File Size: 832 KB Windows 8
Install DriverDevice Type: Network Card File Size: 946 KB Windows 8 64 bit
Install DriverDevice Type: Network Card File Size: 199 KB Windows XP
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.