Biostar Hi-Fi Z97Z7 Ver. 5.x Intel AHCI/RAID Preinstall Driver 13.0.0.1098 64-bit Download

Posted at April 27, 2024 by PCI-DB Team

Biostar Hi-Fi Z97Z7 Ver. 5.x Intel AHCI/RAID Preinstall Driver 13.0.0.1098 64-bit Description

Specifications:

Chipset:
- Intel Z97

CPU SUPPORT:

- Intel Core i7 LGA 1150 Processor
- Intel Core i5 LGA 1150 Processor
- Intel Core i3 LGA 1150 Processor
- Intel Pentium LGA 1150 Processor
- Ready for Intel 4th Gen. unclocked CPU (codename Devil's Canyon)
- Ready for Intel next enthusiast-class CPU(codename Broadwell)
- Support CPU Bclk overclock

MEMORY:

- Support Dual Channel DDR3 2800(OC)/ 2600(OC)/ 2400(OC)/ 2200(OC)/ 2133(OC)/ 1866(OC)/ 1800(OC)/ 1600/ 1333/ 1066 MHz
- Support non-ECC memory modules
- Support Extreme Memory Profile(XMP) memory modules
- 4 x DDR3 DIMM Memory Slot
- Max. Supports up to 32GB Memory

EXPANSION SLOT:

- 1 x PCI-E x16 3.0 Slot (support CrosfireX)
- 1 x PCI-E x16 2.0 Slot (x4)
- 2 x PCI-E x1 2.0 Slot
- 2 x PCI Slot

STORAGE:

- 4 x SATA3 Connector
- 1 x SATA Express Connector(Support 1 x SATA Express 10Gb/s Devices or 2 x SATA3 6Gb/s Devices)
- Support SATA RAID: 0,1,5,10
- Support both Legacy and AHCI Mode
- Support Hot-Plug in AHCI mode
- Support Intel Smart Response Technology
- 1 x M.2(N.G.F.F.) Connector up to 1000MB/s
- Support both PCIE NAND for PCIE SSD and SATA NAND for SATA SSD

USB:

- 4 x USB 3.0 Port
- 1 x USB 3.0 Header
- 2 x USB 2.0 Port
- 2 x USB 2.0 Header

LAN:

- Realtek RTL8111GR - 10/100/1000 Controller
- Support Wake-On-LAN
- Support PXE

MULTI GRAPHICS:

- AMD CrossFireX

INTEGRATED VIDEO:

- By CPU model
- Supports DXDX11.1/ 11/ 10.1/ 10/ 9
- Supports HDCP
- Support DirectX Video Acceleration(DXVA) for accelerating video processing
- Full AVC/VC1/MPEG2 HW Decode
- Support Advanced Scheduler 2.0, 1.0, XPDM
- Support OpenGL 4.0
- Support HDMI, 1.4a specification compliant with 3D
- Support 3 Displays(HDMI + DVI + VGA)

CODEC:

- Realtek ALC892 8-Channel Blu-ray Audio
- Support Blu-ray Audio
- Support HD Audio
- Support 2/4/6/8-channel
- Support Biostar Hi-Fi

REAR I/O:

- 1 x PS/2 Keyboard
- 4 x USB 3.0 Port
- 2 x USB 2.0 Port
- 1 x HDMI Connector, resolution up to 4096x2160@24Hz, 24bpp / 2560x1600@60Hz, 24bpp / 1920x1080@60Hz, 36bpp
- 1 x DVI Connector, resolution up to 1920x2000@60Hz @24bpp
- 1 x VGA Port, resolution up to 1920x2000@60Hz @24bpp
- 1 x RJ-45 Port
- 6 x Audio Connector

INTERNAL I/O:

- 1 x USB 3.0 Header
- 2 x USB 2.0 Header
- 4 x SATA3 6Gb/s Connector
- 1 x SATA Express Connector(Support 1 x SATA Express 10Gb/s Devices or 2 x SATA3 6Gb/s Devices)
- 1 x M.2(N.G.F.F.) Connector
- 1 x Front Audio Header
- 1 x Front Panel Header
- 1 x S/PDIF-OUT Header
- 2 x CPU FAN Header
- 3 x System FAN Header
- 1 x Serial Header
- 1 x CIR Header
- 1 x TPM Header(TPM V1.2)

H/W Monitoring:

- CPU / System Temperature Monitoring
- CPU / System Fan Monitoring
- Smart / Manual CPU / System Fan Control
- System Voltage Monitoring

Overvoltage:

- CPU VCC_IN/ Vcore/ Vring/ VGT/ VSA/ VIOA/ VIOD/ DRAM/ PCH/ PCH PLL

DIMENSION:

- ATX Form Factor Dimension: 30.5cm x 24.4cm ( W x L )

FEATURES:

- Supports PURO Hi-Fi
- Supports 100% Solid capacitor
- Supports Rapid Switch2
- Supports Rapid Debug3
- Supports Charger Booster
- Supports BIOS Online Update

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers