RunCam 2 Camera Firmware 1.3 Download

Posted at May 9, 2024 by PCI-DB Team

RunCam 2 Camera Firmware 1.3 Description

Features:

- High definition
1080p@60fps
720p@120fps
- Low latency
60ms under 1080p
40ms under 720p
- Built-in Wi-Fi
iOS and Android APP
- USB power port
5-17V
2~4S battery
- Removable battery
35g(without battery)
49g(with battery)
- FPV camera
Removable lens hood Multifunctional bracket RF shielding 

Firmware Upgrade

(It would be better to upgrade under OSD menu; press power button to select down and WiFi button to confirm; upgrade when the battery is fully charged )
1. After downloading the firmware, put it under the root directory of micro SD card.
The firmware name is recognized as RUNCAM2.BRN
2. Turn on the RUNCAM 2 with the micro SD card inserted,then the camera will start searching the firmware. When the firmware gets checked, you will get a solid orange light.
3. One quick press on the power button.
4. One quick press on the WiFi button.
5. Orange light blinks slowly while firmware is upgrading.
6. After 3.5 minutes, the camera will automatically shut down. And upgrade is completed.

Note

: After firmware updating, please delete this firmware file runcam2.BRN manually.

New Features of RUNCAM2 V1.3 Firmware:

1. Optimize sound recording
2. Fix the bug of invalid G-sensor after rebooting the camera
3. Reset to factory settings: in standby mode, press the power button 3 times in quick succession
4. Loop recording is off by default
5. Add the function of firmware file automatic deletion (valid upon a second upgrading of 1.3 version firmware or above.)

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers