AMKOV AMK7000S Camera Firmware 1.03 Download

Posted at November 5, 2024 by PCI-DB Team

AMKOV AMK7000S Camera Firmware 1.03 Description

AMKOV 1080P@60FPS Wifi Sports Action Camera 4K 2.7K Timelapse

User Guideline:
1. Decompressing the files
2. Format the TF(MicroSD) card ,and Copy the two files named "IDV.BRN" and "UpdateFW.txt" to the card
3. Insert the card to DV;
4. Insert the full charged battery to DV ,and close the battery cover;
5. Press the "shutter key" and "Power key" at the same time;
6. DV will start-up and enter the burning mode automatic ,and the status indicator light flashes , and it'll show "00:00" on the LCD screen;
7. DV will power off automatic when the burning finished;
8. Start-up DV , and connect APP,then you can check the new FW version in "Setting" =>"about";

Note:

1. During the burning period , Make sure that the power is sufficient, If not ,DV won't work later;
2. Format the TF card when the burning finish , so that it won't enter burning mode again by incorrect operation;
3. After burning, the SSID of WiFi will change to iDV+8 bit random code instead of "iDV+serial number" before;

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers