Western Digital Universal Firmware Updater 3.2.5.1 Download

Posted at April 28, 2024 by PCI-DB Team

Western Digital Universal Firmware Updater 3.2.5.1 Description

WD Universal FW Updater 3.2.5.1:

- Fixed issue of drive dropping off of the list after system wakes up from standby mode. (Firmware 1.026 for My Book Duo)

Firmware 1.012:

- Updated to meet the new Compliance requirement.

For the following drives with a P/N that ends with -05:
- My Passport Air
- My Passport Slim
- My Passport Essential
- WD Elements Portable

Firmware 1.065:

- Fixes an issue where the drive is not mounted after the computer exits sleep mode for some users.
- Reduced standby power consumption on desktop products.
- Fixes an issue on some systems where the drive would not mount after a cold boot.

For the following drives with a P/N that ends with -04:
- My Book (USB 3.0 and USB 2.0)
- My Book Essential (USB 3.0 and USB 2.0)
- My Book for Mac (USB 3.0 and USB 2.0)
- WD Element
- My Passport
- My Passport Edge
- My Passport Edge for Mac
- My Passport Ultra
- My Passport Slim
- My Passport Air
- My Passport Enterprise
- WD Elements SE Portable

Firmware 1.016:

- This firmware update fixes the drive’s handling of infrequent ECC errors which can cause data access issues.

For the following drives with a P/N that ends with -00:
- My Book Essential (USB 3.0 and USB 2.0)
- My Passport Essential (USB 3.0 and USB 2.0)
- My Passport Essential SE (USB 3.0 and USB 2.0)

Firmware 1.025:

- Now works with My Passport Slim portable drives.

For the following drives with a P/N that ends with -01:
- My Book Essential (USB 3.0 and USB 2.0)
- My Book Studio (USB 3.0 and USB 2.0)
- My Book for Mac (USB 3.0 and USB 2.0)
- My Passport (USB 3.0 and USB 2.0)
- My Passport for Mac (USB 3.0 and USB 2.0)
- My Passport Essential (USB 3.0 and USB 2.0)
- My Passport Essential SE (USB 3.0 and USB 2.0)
- My Passport
- My Passport Ultra
- My Passport Slim
- My Passport Air
- My Passport Edge
- My Passport Enterprise
- WD Elements SE Portable

Firmware 1.026:

- Fixed an issue where the drive is no longer visible on some systems after the system wakes up from standby mode.

For the following drives with a P/N that ends with -00:
- My Book Duo

Firmware 2.018/2.019:

- This firmware version includes support for Mac OS-X Tiger.

Compatibility:
- My Book Essential (+ WD SmartWare)
- My Book for Mac (+ WD SmartWare)
- My Book Elite (+ WD SmartWare)
- My Passport Essential (+ WD SmartWare)
- My Passport Essential SE (+ WD SmartWare)
- My Passport for Mac (+ WD SmartWare)
- My Passport SE for Mac (+ WD SmartWare)
- My Passport Elite (+ WD SmartWare)
- My Passport

Firmware 1.012:

- Works better with some operating systems and disk utilities with regards to data cluster alignment on the disk.

Compatibility:
- My Book Studio (+ WD SmartWare)
- My Passport Studio (+ WD SmartWare)

Firmware 1.014:

- Initial Release

Compatibility:
- My Passport Studio LX (+ WD SmartWare)

Firmware 1.041:

- Initial Release

Compatibility:
- My Passport Studio

Firmware 1.049:

- VCD device does not always mount when connected via Firewire on Mac.

Compatibility:
- My Book Studio (+ WD SmartWare) without the Electronic Paper Display

Firmware 1.017:

- Initial Release

Compatibility:
- Studio Edition II

Firmware 1.049:

- Fixed drive occasionally failing to re-enumerate after a system warm reboot.

For the following drives with a P/N that ends with -03:
- My Passport
- My Passport Edge
- My Passport Edge for Mac
- My Passport Ultra
- My Passport Slim
- My Passport Air
- WD Elements SE Portable

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Western Digital Drivers