TP-Link TD-W8951ND V6 Router Firmware 141027 Download

Posted at November 24, 2024 by PCI-DB Team

TP-Link TD-W8951ND V6 Router Firmware 141027 Description

150Mbps Wireless N ADSL2+ Modem Router

- ADSL 2/2+ Modem, Wireless N Access Point and 4-Port Router, in a single device
- Wireless N speed up to 150Mbps, great for online gaming, Internet call and video streaming
- LAN Ports/PVCs bundle and QoS engine for pleasant triple-play (data, voice and video) experience
- Easy one-touch wireless security encryption with the"WPS" button and Easy Wi-Fi On/Off button
- Supports the latest Internet Protocol IPv6 to future-proof your network

Modifications and Bug Fixes:

 - Added a wireless pre-encryption function.The default WIFI password is the PIN number.
- Update Timezone to the latest version.
- Fixed the issue that the router may reboot automatically or wireless clients drop connection in some special condition.
- Fixed the bug that can not access the router by 'tplinkmodem.net' when DNS setting is assigned manually on clients.
- Fixed the issue that some special wireless adapter can't connect to the router.

How to upgrade TP-LINK ADSL Modem Router

Step 1: Log into the ADSL Modem Router by typing http://192.168.1.1 in the address bar of the web browser. The User Name and Password are both admin unless you have changed it before.
Step 2: Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
Step 3: Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
Step 4: Click Status, verify that the router’s firmware has been upgraded.
Step 5: It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tool->Factory Default, Click Restore Button.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers