TP-Link TD-W9980 V1 Router Firmware 150507 Download

Posted at December 22, 2024 by PCI-DB Team

TP-Link TD-W9980 V1 Router Firmware 150507 Description

N600 Wireless Dual Band Gigabit VDSL2/ADSL2+ Modem Router

- Featuring broadband speeds up to 100Mbps over VDSL2 and backward compatible with ADSL
- Simultaneous 2.4GHz 300Mbps and 5GHz 300Mbps connections for 600Mbps of total available bandwidth
- Versatile Connectivity: VDSL/ADSL or Ethernet WAN for multiple Internet connection types
- 2 USB ports for storage sharing, printer sharing, FTP Server and Media Server

Modifications and Bug Fixes:

New Features/Enhancement:
1. The prefix length of the Static IP of IPV6 now can be changed from 0 to 128.
2. Updated the ISP information list.
3. Improved the performance of Wireless 5GHz in short distances.

Bug Fixed:
1. Fixed the bug that the speed dropped on the BT line of UK when G.INP was enabled.
2. Fixed the kcodes security bug.
3. Fixed the bug that TD-W9980 had compatibility issues with the line of ZEN in UK.
4. Fixed the bug that TD-W9980 had compatibility issues with the line of TALK TALK in UK.
5. Fixed the bug that static IPV6 connection did not take effect after a reboot.

Notes

1. For TD-W9980_V1
2. Old firmware’s configuration file can be imported into this new firmware.
3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading.

How to upgrade TP-LINK ADSL Modem Router

Step 1: Log into the ADSL Modem Router by typing http://192.168.1.1 in the address bar of the web browser. The User Name and Password are both admin unless you have changed it before.
Step 2: Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
Step 3: Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
Step 4: Click Status, verify that the router’s firmware has been upgraded.
Step 5: It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tool->Factory Default, Click Restore Button.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers