TP-Link TD-W8950N V1 Router Firmware 150205 Download

Posted at December 31, 2024 by PCI-DB Team

TP-Link TD-W8950N V1 Router Firmware 150205 Description

150Mbps Wireless N ADSL2+ Modem Router

- All-in-One Device: ADSL2+ Modem, NAT Router, 4- Port Switch and Wireless N Access Point
- Wireless N speed up to 150Mbps, great for online gaming, Internet call and video streaming
- Ethernet WAN (EWAN) offers another broadband connectivity option for connecting to Cable, VDSL or Fiber modems
- Easy one-touch wireless security encryption with the Quick Security Setup button

Modifications and Bug Fixes

Bug Fixed:
1.Fixed the bug that IP address couldn't be saved in the IP filter when using IP+Mask format.
2.Fixed the bug that wireless is not available after reboot when wireless schedule was enabled.
3.Fixed the bug that DDNS account couldn't be saved when the password contained '#'.
4.Fixed the bug that when the main nework was disabled ,the guest network still shown wrongly as enabled.
5.Fixed the bug that in some applications DNS will work improperly.
6.Fixed the bug that the router will not dial up again when PPPoE authentication failed.
7.Fixed the bug that the wireless in Quick Setup will automatic disabled after 10 mins. When enable it,the SSID is empty and not encrypted.
8.Fixed the bug that the router doesn't limit the unsupported characters in DDNS domain name.
9.Fixed the bug that bandwidth control of Guest network could not take effect.
10.Fixed the bug that the router would forward the packets to other LAN ports which were supposed to forward to the WLAN.

Notes:

1. For TD-W8950N V1
2. Old firmware’s configuration file can be imported into this new firmware.
3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading.

How to upgrade TP-LINK ADSL Modem Router

Step 1: Log into the ADSL Modem Router by typing http://192.168.1.1 in the address bar of the web browser. The User Name and Password are both admin unless you have changed it before.
Step 2: Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
Step 3: Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
Step 4: Click Status, verify that the router’s firmware has been upgraded.
Step 5: It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tool->Factory Default, Click Restore Button.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers